Advertisement
Quick Links
15G Series Horizontal Grinders
Series:
15
Grinder:
Throttle Terminations:
L
Lever
RPM:
90
140
120
180
For additional product information visit our website at http://www.clecotools.com
NORTH AMERICA
CooperTools
P .O. Box 1410
Lexington, SC 29071
15
G L
-
XXX
-
EUROPE
Cooper Power Tools GmbH & Co.
Postfach 30
D-73461 Westhausen
Operation & Service Manual
823006
X
X
X
Guard:
25
3
4
Terminations:
3T
3/8-24
Wheel Type:
W
Type 1 Wheel
2/01
2 1/2
3 In.
4 In.
1
Advertisement
Related Manuals for Cooper Tools Cleco 15G Series
Summary of Contents for Cooper Tools Cleco 15G Series
- Page 1 15G Series Horizontal Grinders Series: Grinder: Throttle Terminations: Lever RPM: For additional product information visit our website at http://www.clecotools.com NORTH AMERICA CooperTools P .O. Box 1410 Lexington, SC 29071 Operation & Service Manual 823006 Wheel Type: EUROPE Cooper Power Tools GmbH & Co.
- Page 2 Any wheel guard that is damaged or bent must be replaced. NOTE: The grinder must be held so that the opening in the guard is away from the operator. Before...
- Page 3 Before mounting a wheel, after all tool repairs, and when- ever a grinder is issued for use, check the free speed of the grinder with a tachometer to make certain that the actual free speed at 90 psig (6.2 bar) does not exceed the rated free speed stamped on the tool.
- Page 4 • You notice excessive end play in the spindle • You hear any unusual sound from the grinder RETURN THE TOOL TO THE TOOL CRIB FOR SERVICE IMMEDIATELY!
- Page 5 USE QUALITY ABRASIVE WHEELS The primary source of vibration when using a portable grinder is an abrasive wheel that is out of balance, out of round, untrue, or possibly any combination of all three. The use of quality abrasive wheels which are well bal- anced, round, and true is highly recommended as they have been found to significantly reduce vibration.
-
Page 6: Caution Labels
USE ONLY WHEELS WITH SPEED RATING EQUAL TO OR GREATER THAN ACTUAL FREE RUNNING TOOL SPEED CHECK TOOL SPEED WITH TACHOMETER BEFORE EVERY WHEEL CHANGE READ THE MANUFACTURER'S OPERATING INSTRUCTIONS AND SAFETY INSTRUCTIONS BEFORE USING THIS GRINDER 202595 TYPE 1 Proper Wheel Guard Wheel... - Page 7 OPERATING AND SERVICE INSTRUCTIONS READ SAFETY RECOMMENDATIONS BEFORE CON- NECTING TOOL. The 15G Series Grinders are designed to operate on 90 psig (6.2 bar) maximum air pressure, using a 3/8" hose up to 8' in length. If additional length is required, the next larger hose size may be connected to the 8' whip hose.
- Page 8 842970 865655 865695 864735 865787 2 1/2" 865786 3" 865988 4" SERVICE INSTRUCTIONS FOR 15G MOTOR & GOVERNOR DISASSEMBLY Clamp the cylinder 864236, lightly in a soft jawed vise and tap the rotor 865694, out of the front rotor bearing 865658. This will allow the front rotor bearing, front bearing plate, 865693, rotor collar, 865657, cylinder, and rotor blades, 864234, to be removed from the rotor.
- Page 9 843590 865698 863093 844311 843590 SERVICE INSTRUCTIONS FOR 15G HANDLE DISASSEMBLY To disassemble the lever throttle handle, unscrew the throttle valve cap 864531. This will allow the complete throttle valve assembly to be removed from the handle. The oiler body on the handle may be removed from the front of the handle with the aid of spreaders.
- Page 10 NOTES...
- Page 11 NOTES...
- Page 12 CooperTools 670 Industrial Drive Lexington, SC 29072 Phone: (803) 359-1200 Fax: (803) 359-2013 www.clecotools.com...
Need help?
Do you have a question about the Cleco 15G Series and is the answer not in the manual?
Questions and answers