ViewSonic VT2405LED User Manual page 42

Item Function
Aspect
Selects through Wide mode settings.
Ratio
Skin Tone Skin Color adjust. (0-10)
Advance contrast enhance. (Standard, Low, Off,
ACE
High)
Noise Select to reduce the noise level of connected
Reduction equipment.
Press the OK button to automatically adjust the
Auto
display settings to optimize performance based on
Adjust
the VGA mode.
Adjusts the position of the picture left and right in
H-Position
the window based on the VGA mode.
Adjusts the position of the picture up and down in
V-Position
the window based on the VGA mode.
Controls the width of the picture based on the VGA
Size
mode.
Controls the signal phase, which can improve
Phase
focus clarity and image stability based on the VGA
mode.
* Auto Adjust, H-Position, V-Position, Size, and Phase selections will only appear in VGA input
source.
ViewSonic
Operation
Press ◄ or ► to
change selection.
Press ◄ or ► to
change selection
or make
adjustment.
Press OK
Press ◄ or ► to
change selection.
39
Range
• Full
• Zoom1
• Zoom2
• Panorama
• Auto
• 4:3
• Under Scan
0 to 10
• Standard
• High
• Off
• Low
• Standard
• High
• Off
• Low
0 to 100
0 to 100
-30 to +30
0 to 100
VT2205LED/VT2405LED