Related Manuals for Uni-Ubi Uface 3
Summary of Contents for Uni-Ubi Uface 3
- Page 1 Uface 3 User Manual In order to have a good experience when using, please read the manual carefully before operating the device.
-
Page 2: Device Appearance
Device Appearance 100 [3.9] 27.4 [1.1] Infrared Fill-in Light RGB Camera IR Camera Photosensitive Sensor Display Screen Swiping Area (pro version) USB Interface Restart Power Interface I/O Interfaces (PRO version) -
Page 3: Product List
M4*30 Self Tapping Screw x 2 M4*30 Machine Screw x 2 Desktop Mounting x 2 Allen Key x 1 Uface 3 Overseas Attendance Manual In order to help you better understand the product, please read the instructions carefully before using the device. -
Page 4: Wall Mounting
Wall Mounting For wall mounting, the hole shall be drilled according to the hole position of the mounting sticker, and the desktop mounting shall be inserted in the holes. Use an Allen Key to loosen the set screw and remove the wall mounting bracket. For wall mounting, use self-tapping screws to fix the bracket on the wall;... - Page 5 Connect the cable and I/O interfaces (Pro version) to the device. Connect the power supply Following the customer's needs to connect the door lock and exit button. Fasten the device to the wall mounting bracket and use an Allen Key to tighten the bottom set screw.
-
Page 6: Desktop Mounting
Desktop Mounting Tilt 30° when inserting Tilt 20° when inserting Tilt 10° when inserting Desktop Mounting Bracket After removing the wall mounting bracket, connect the power supply or I/O interfaces. Connect the power supply BUTTON DOOR_NO DOOR_COM DOOR_NC Following the customer's needs to connect the door lock and exit button. - Page 7 After the cable is connected, reinstall the wall mounting bracket to the device, and insert the desktop mounting bracket into the holes of different heights according to the angle requirements. Finish the mounting.
- Page 8 Standalone Network Click ( ) to enter the Menu. Click the Network Config to configure the network. If the configuration is completed in booting, there is no need to reconfigure. User Mgmt. Records Network Config System Settings Click ( ) after entering the device password.
-
Page 9: Add Users
Add Users Click (User Mgmt.) to enter the Click Add users. user management interface. User Management Add users User Mgmt. Records Query users Batch import Network Config System Settings Batch export Click + to enter the photo-taking Enter 1-32 digit Emp. No. process to add the photos (required) and name (optional), (optional, for face recognition) -
Page 10: Recognition Mode
Recognition Mode Face The registered user enters the photo to enable the face recognition mode and then conducts face recognition in the main interface. Card The registered user enters the card number to enable the card mode and then swipes the card in the swiping area of the main interface. - Page 11 Clock-in Records Click (Records) to enter the Click to enter the directory records interface Attendance Records Clock-in records User Mgmt. Records Abnormal records Export records Network Config System Settings Check the clock-in records Only abnormal records Clock-in records Abnormal records 2019-12-11 2019-12-11 Rey Mibourne...
- Page 12 Product Name: FACE RECOGNITION TERMINAL Brand Name: Model No.: K32-1901-OS-TDC, K32-1901-OS-T Universal Ubiquitous Co.,Ltd. E-mail: wangjianhao@uni-ubi.com hereby declares that this [Name: FACE RECOGNITION TERMINAL, K32-1901-OS-TDC, K32-1901-OS-T] is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
- Page 13 F F CC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.