Summary of Contents for Sanken SWL Series
- Page 1 Operation Manual SWL Series PAN40012-001E-07 PAN40012-001E-07 SANKEN ELECTRIC CO.,LTD. 1/26...
- Page 2 2 Specification Standards 3 Dimensional Outline Drawing P.10 4 Model Name Generic Examples, Options P.18 5 Terminal Connection P.19 6 Derating P.20 7 Mounting Method P.22 8 Expected life P.24 9 Warranty period P.24 PAN40012-001E-07 PAN40012-001E-07 SANKEN ELECTRIC CO.,LTD. 2/26...
-
Page 3: Safety Precautions
Please strictly observe the specified environmental conditions, such as the environmental temperature and the temperature of the environment. Installation and installation methods are determined for each model. ● Do not install or install in a direction outside the designated direction. PAN40012-001E-07 PAN40012-001E-07 SANKEN ELECTRIC CO.,LTD. 3/26... - Page 4 AC input by turning off an external input breaker. Please contact your retailer or we. In the unlikely event of a fire, use a fire extinguisher for electric fire (powdered or ABC) and avoid fire extinguishment with water. PAN40012-001E-07 PAN40012-001E-07 SANKEN ELECTRIC CO.,LTD. 4/26...
- Page 5 Avoid use in such an environment because this could result in a failure. We strive to improve the quality and reliability of our products, but when using them, we ask the purchaser to be responsible for the safety design of the equipment. PAN40012-001E-07 PAN40012-001E-07 SANKEN ELECTRIC CO.,LTD. 5/26...
- Page 6 8. It is a typical value and should be within the rated output power. 9. The output current is a typical value and should be used within the rated output power. 10. AC90V and below requires output delirating. PAN40012-001E-07 SANKEN ELECTRIC CO.,LTD. 6/26...
- Page 7 8. It is a typical value and should be within the rated output power. 9. The output current is a typical value and should be used within the rated output power. 10. AC90V and below requires output delirating. PAN40012-001E-07 SANKEN ELECTRIC CO.,LTD. 7/26...
- Page 8 8. It is a typical value and should be within the rated output power. 9. The output current is a typical value and should be used within the rated output power. 10. AC90V and below requires output delirating. PAN40012-001E-07 SANKEN ELECTRIC CO.,LTD. 8/26...
- Page 9 8. It is a typical value and should be within the rated output power. 9. The output current is a typical value and should be used within the rated output power. 10. AC90V and below requires output delirating. PAN40012-001E-07 SANKEN ELECTRIC CO.,LTD. 9/26...
-
Page 10: Dimensional Outline Drawing
(Unit: mm) 3. Dimensional Outline Drawing (The error without instruction is ±1.0mm) ■ SWL100-**-S ■ SWL100-**-L-S PAN40012-001E-07 PAN40012-001E-07 SANKEN ELECTRIC CO.,LTD. 10/26... - Page 11 (Unit: mm) 3. Dimensional Outline Drawing (The error without instruction is ±1.0mm) ■ SWL100-**-LC-S PAN40012-001E-07 PAN40012-001E-07 SANKEN ELECTRIC CO.,LTD. 11/26...
- Page 12 (Unit: mm) 3. Dimensional Outline Drawing (The error without instruction is ±1.0mm) ■ SWL150-**-S ■ SWL150-**-L-S PAN40012-001E-07 PAN40012-001E-07 SANKEN ELECTRIC CO.,LTD. 12/26...
- Page 13 (Unit: mm) 3. Dimensional Outline Drawing (The error without instruction is ±1.0mm) ■ SWL150-**-LC-S PAN40012-001E-07 PAN40012-001E-07 SANKEN ELECTRIC CO.,LTD. 13/26...
- Page 14 (Unit: mm) 3. Dimensional Outline Drawing (The error without instruction is ±1.0mm) ■ SWL240-**-S ■ SWL240-**-L-S PAN40012-001E-07 PAN40012-001E-07 SANKEN ELECTRIC CO.,LTD. 14/26...
- Page 15 (Unit: mm) 3. Dimensional Outline Drawing (The error without instruction is ±1.0mm) ■ SWL240-**-LC-S PAN40012-001E-07 PAN40012-001E-07 SANKEN ELECTRIC CO.,LTD. 15/26...
- Page 16 (Unit: mm) 3. Dimensional Outline Drawing (The error without instruction is ±1.0mm) ■ SWL300-**-S ■ SWL300-**-L-S PAN40012-001E-07 PAN40012-001E-07 SANKEN ELECTRIC CO.,LTD. 16/26...
- Page 17 (Unit: mm) 3. Dimensional Outline Drawing (The error without instruction is ±1.0mm) ■ SWL300-**-LC-S PAN40012-001E-07 PAN40012-001E-07 SANKEN ELECTRIC CO.,LTD. 17/26...
- Page 18 Optional Equipment L-type Output Output Standard L-type Remote Type Chassis Power Voltage Products Chassis ON/OFF Cover SWL***-○○-S ● 100W 150W SWL***-○○-L-S ● 240W ● SWL***-○○-LC-S ● SWL300-○○-S 300W ● SWL300-○○-L-S SWL300-○○-LC-S ● PAN40012-001E-07 SANKEN ELECTRIC CO.,LTD. 18/26...
-
Page 19: Terminal Connection
VHR-6N SVH-21T-P1.1 Output 2： -V BVH-21T-P1.1 3： -V CN601 4： +V 5： +V 6： +V (NOTE) ＊ 2.4 pin of CN101 nothing ＊ CN601 should be used at 5 A or less per pin(Rated output) PAN40012-001E-07 SANKEN ELECTRIC CO.,LTD. 19/26... - Page 20 Load[%] Input Voltage [V] SWL100-12-S (B)(C)(D)(E) Output current Load [%] Ambient temperature [℃] Reference：Derating Curve (Without Chassis & Cover) SWL100-24,36,48-S Output (B)(C)(E) current Load [%] Ambient temperature [℃] Reference：Derating Curve (Without Chassis & Cover) PAN40012-001E-07 PAN40012-001E-07 SANKEN ELECTRIC CO.,LTD. 20/26...
- Page 21 Reference：Derating Curve (Without Chassis & Cover) SWL240-**-S Output current current Load [%] Ambient temperature [℃] Reference：Derating Curve (Without Chassis & Cover) SWL300-**-S (A),(B),(C) Output (D),(E) current Load [%] Ambient temperature [℃] Reference：Derating Curve (Without Chassis & Cover) PAN40012-001E-07 PAN40012-001E-07 SANKEN ELECTRIC CO.,LTD. 21/26...
-
Page 22: Mounting Method
Ensure that the input FG terminal and the installation hole FG are earthed when installing the power supply. ※The protective earth conductor of the final device is not directly connected to the FG(CN101,mounting hole) in the power supply. PAN40012-001E-07 PAN40012-001E-07 SANKEN ELECTRIC CO.,LTD. 22/26... - Page 23 Because this product uses surface-mounting parts, please be aware of the installation method in which contact and stress are applied to the board at the time of installation. Please contact us about the option installation method. PAN40012-001E-07 SANKEN ELECTRIC CO.,LTD. 23/26...
-
Page 24: Expected Life
② Earthquakes, lightning, fire, wind and flood damage, and other natural disasters ③ By modifying, disassembling, and repairing products other than ourselves, Cases due to reasons other than our responsibilities ④ External factors such as abnormal voltage or other connected equipment SANKEN ELECTRIC CO.,LTD. 24/26... - Page 25 PAN40012-001E-07 SANKEN ELECTRIC CO.,LTD. 25/26...
- Page 26 171-002, Japan 530-0001, Japan Phone:+81-3-3986-6151 Phone: +81-6-6450-4400 Phone:+81-52-581-2767 Inquiry by E-mail sw.power@sanken-ele.co.jp ● This promotion sheet is as of October 2020. ● Please note that the contents are subject to change without notice for product improvement. PAN40012-001E-07 SANKEN ELECTRIC CO.,LTD. 26/26...