Advertisement
1380 Beverage Drive, Suite W
Stone Mountain, GA 30083
1-800-426-6256 | 770-243-2323
Operation
The gooseneck is attached to the EasyClean® Pump and is used to fill the automatic
taper. Place the EasyClean® Pump gasket (#700049)on the EasyClean® Pump housing,
over the protruding studs. Then, set the gooseneck over the studs and tighten the hex
nuts firmly to prevent leakage.
Maintenance
Remove the gooseneck from the EasyClean® Pump and clean thoroughly with a brush and
water (or a water hose) to remove all joint compound from the tool. Then, after the tool is clean,
lightly oil with Ames® Bazooka® Oil or any light machine oil.
Updated 04 2012
Gooseneck
Operation and Maintenance Guide
Better – Faster – Every time
www.tapetech.com
© 2012 TapeTech Tool Co. All Rights Reserved
Advertisement
