Table of Contents
Advertisement
Message
Disc is full.
(No area for new recording)
You cannot record on the disc
as Power Calibration Area is
full.
This disc is already finalized.
Can not record on this disc.
You cannot record more than
49 titles on the disc.(The
maximum is 49.)
You cannot record more than
254 chapters on the disc.(The
maximum is 254.)
This program is not recordable
in +VR mode.
The disc has a different menu
layout. (Set "Replace Disc
Menu" to ON to rewrite the
menu.)
If an error occurs during the timer recording, one of the following error numbers (40 to 42) or the above error
messages (error number: 1 to 39) is displayed on the recording menu after timer recording.
(Once the screen of the program line is exited, the program line for the error will be cleared.)
(No Error Message is displayed for the error No. 40 ~ 42.)
A program with the error number is grayed out and asterisked on the timer programming list.
Message
Error message is not
displayed.
Solution
Insert the recordable disc with
enough recording space.
Insert a new disc.
Release the finalizing for this
disc.
Repeat the same operation.
Delete unnecessary titles.
Delete unnecessary chapter
marks.
You cannot record copy
prohibited programs.
Set "Replace Disc Menu" to
"ON" to rewrite the menu,after
that you will record to.
Ti
mer Programming
JAN
PM
2.
---
3.
---
4.
---
5.
---
6.
---
7.
---
8.
---
Solution
- Set the timer programming
correctly.
- Set the timer programming
before the start time.
Turn the power on and set the
clock correctly then set timer
programming again.
Insert the recordable disc.
1-8-2
Error
Error Description
No.
30
No avilable recording space.
35
PCA is Full. (in REC start)
36
It is finalized. (Video Format Disc)
37
Access to Memory Area range outside.
38
Sector Address is wrong.
39
BUP writing error of chapter editing.
43
Its recording capacity has been reached.
44
The 254 chapter has been reached.
45
During the CGMS picture input.
Trying to record onto the +VR formatting
46
disc that had been recorded by the other
recorder.
PM DTV 40.1
The speed mode changes
to the error number.
Error
Error Description
No.
- Some portion has not been recorded
because of program overlapping.
40
- Recording did not start at the start time.
41
Power failed
42
No disc when recording
Priority
10
4
8
-
-
-
9
10
12
7
Priority
-
-
-
E7C50FIS
Advertisement
Table of Contents
