Compliance Information For U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this unit near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifi...
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC are trademarks of VESA. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
NOTE: The CD jacket contains the Quick Start Guide, and the CD includes the User Guide PDF files and INF/ICM display optimization files. The INF file ensures compatibility with Windows operating systems, and the ICM file (Image Color Matching) ensures accurate on-screen colors. ViewSonic recommends that you install both files. Precautions •...
INF file. 4 Install Display Optimization files (INF and ICM files) (1) Insert the ViewSonic Wizard CD-ROM into your computer’s CD-ROM drive. NOTE: If your computer does not have a CD-ROM drive, see “Customer Support” on page 12.
OSD image settings are now locked. • OSD Unlock: Press and hold the [2] button again for 5 seconds. The message “OSD UNLOCK” will then display briefly, indicating that the OSD image settings are now unlocked. controls ® E72f+ ViewSonic...
Adjusting the Screen Image Use the buttons on the front control panel to display and adjust the OnView controls which display on the screen. The OnView controls are explained at the top of the next page and are defined in “Main Menu Controls” on page 8. Displays Main Menu Scrolls through menu options and adjusts...
Page 10
Press button [2] to toggle to the next control in the pair. To adjust the selected control, such as press the arrow buttons. To save the control setting and Exit the menu press button [1] twice. in the sample below, CONTRAST ViewSonic E72f+...
Page 12
® Color allows you to move the on-screen menus and allows you to choose from among several returns adjustments to the original factory displays the frequencies (horizontal and E72f+ ViewSonic...
Power Saving Modes Macintosh models prior to G3 require a Macintosh adapter. To order a ViewSonic contact Customer Support. You will need to provide the product serial number. NOTE: This product was designed for operation in the magnetic fields of the hemisphere where it was purchased.
• Connect the monitor to another computer. • Select Degauss from the Main Menu. Do this only once. • If you have an older graphics card, contact ViewSonic Entire screen image rolls vertically • Make sure video input signals are within the monitor's specified frequency range.
Customer Support For technical support or product service, see the table below or contact your reseller. You will need the product serial number. NOTE: Country/ Web site Region United States www.viewsonic.com/ support Canada www.viewsonic.com/ support United Kingdom www.viewsoniceurope.com Europe, Middle www.viewsoniceurope.com...
ViewSonic does not recommend the use of any ammonia or alcohol-based cleaners on the monitor screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the monitor. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.