Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Voltacon Sonic Series
- Page 1 Sparky Domestic EV Chargers Sonic Series AC EV Charging Station User Manual...
- Page 3 Sonic Series AC EV Charging Station User Manual About this User Manual Read carefully before installation, maintenance and operation! Failure to read this manual carefully may lead to improper operation. ▷ Failure to follow the safety notes may lead to a danger of death, injury and ▷...
-
Page 4: Table Of Contents
Sonic Series AC EV Charging Station User Manual CONTENTS 1. ABBREVIATIONS ..............4 2. SAFETY NOTES ..............5 2.1. Safety signs used ..............................5 2.2. Environment ................................6 2.3. Installation ................................7 2.4. Operation ................................7 2.5. Maintenance ................................8 3. - Page 5 Sonic Series AC EV Charging Station User Manual 6.6. Abnormally stop charging ..........................32 7. FAULT HANDLING AND MAINTENANCE ..........32 7.1. Fault Handling ..............................32 7.2. Maintenance ............................... 34 WARRANTY AGREEMENT ............. 35 DECLARATION OF CONFORMITY(DOC) ..........35 COMPLIANCE STATEMENT OF WEEE ............ 37...
-
Page 6: Abbreviations
Sonic Series AC EV Charging Station User Manual 1. ABBREVIATIONS Abbreviations Description International Electrotechnical Commission Electrical Vehicle, this can be BEV (battery EV) or PHEV (plug-in hybrid EVSE Electric Vehicle Supply Equipment [IEC61851-1] On-board charger (of an EV) Liquid Crystal Display... -
Page 7: Safety Notes
Sonic Series AC EV Charging Station User Manual connect the shell of the equipment to be protected to the PEN line 2. SAFETY NOTES 2.1. Safety signs used The following warning signs, mandatory signs and information signs are used in this manual, on and in the AC EV Charging station. -
Page 8: Environment
Sonic Series AC EV Charging Station User Manual Indicates important texts, notes or tips. Indicates recycling information. Indicates assemblies or parts that must be disposed of properly. Do not dispose of them in the household waste. 2.2. Environment EV Charging station should be installed on the incombustible such as concrete;... -
Page 9: Installation
Sonic Series AC EV Charging Station User Manual 2.3. Installation Safety protection must be done when installing the EV Charging station. Installation and wiring should be done by personnel with professional ▷ qualification, otherwise, hazardous electric shock may result. Make sure input power supply is entirely disconnected before wiring;... -
Page 10: Maintenance
Sonic Series AC EV Charging Station User Manual is exposed. If you find any, please contact the supplier in time. EV can only be charged with the engine off and stationary. ▷ Do not charge in rainy and thunderous weather. -
Page 11: Standards Compliance
EV to the supply network to supply energy to the vehicle The Charging mode of Sonic series product is Mode 3 ◼ is a method for the connection of an EV to an AC EV supply equipment... -
Page 12: Charging Interface
The charging connector of Sonic series products meet IEC 62196-2, Type 2 plug (with charging cable). Fig. 3-2 Type 2 plug on Sonic series products Sonic series products provide a Type 2 female plug with charging cable, it only charging an ◼ EV with a Type 2 vehicle inlet. -
Page 13: Product Information
Welcome to use AC EV Charging station produced by our company. The shape & dimensions of AC EV charging station shown as Fig. 4-1. ◼ Fig. 4-1 The shape & dimensions of Sonic series The block diagram of AC EV charging station is shown as Fig. 4-2. ◼... -
Page 14: Model Number Definition
Sonic Series AC EV Charging Station User Manual 4.2. Model number definition The model number definition of charging station follows the rules as shown in Fig. 4-3. HM10 □ □□ Maximum output rated current 16: 16A; 32: 32A Phase number:... - Page 15 Sonic Series AC EV Charging Station User Manual Functional description 4.3.2. Model series Sonic series Charging Mode Mode 3 Charging Control Remote: “APP-controlled” Local: “Button-controlled” or “Card-controlled” Indicator Lights Multi-color atmosphere lights Networking interface WiFi (2.4GHz / 5G Hz), and support OCPP 1.6J Protocol (Optional)
-
Page 16: Nameplate
Sonic Series AC EV Charging Station User Manual 4.4. Nameplate On the wallbox shell, there is a nameplate identifying the model and specification of the charging station, the content is shown as Fig. 4-4. Fig. 4-4 The location and content of the nameplate... -
Page 17: Installation
Sonic Series AC EV Charging Station User Manual 5. INSTALLATION 5.1. Unpacking Packing list 5.1.1. Package Quantity AC EV Charging Station 1 pc Empty socket 1 pc RFID card 2 pcs Wall-mounting accessories (including A+B+C+D+E as Fig. 5-1 shown) 1 set... -
Page 18: Prepare
Sonic Series AC EV Charging Station User Manual ▷ If any damage or missing parts are found, please do not start the machine and contact the supplier as soon as possible. ▷ Please keep the packing box and packing materials 1 month for future handling. - Page 19 Sonic Series AC EV Charging Station User Manual Fig. 5-2 Minimum space requirements for wall mounting It is suggested that the charging station should be installed in a place with good ventilation, ◼ no direct sunlight and shelter from wind and rain. In order to ensure good ventilation condition, you should mount the charging station vertically and leave enough space.
-
Page 20: Power Supply System
Cross screwdriver Fastening screw 5.3. Power supply system Sonic series products are suitable for installation in TN power supply system. TN-S power supply system wiring mode Fig. 5-3 Sonic work in TN-S system TN-C power supply system wiring mode Earth rod should be installed as far as possible to ensure that household electrical equipment... -
Page 21: Installation Steps
Sonic Series AC EV Charging Station User Manual can be effectively protected zero connection. The Fig.5-4 shows the TN-C power supply system with earth rod. Fig. 5-4 Sonic work in TN-C system with earth rod In TN-C, for local earth rod where there is no condition to install, a series of circuits are set inside Sonic to protect safety. - Page 22 Sonic Series AC EV Charging Station User Manual Fig. 5-5 Wall-mounting accessories-E Drill 3 holes with diameter of 6mm and depth of at least 50mm on the wall using wall- mounting accessories-E. Step 2: Fixed the wallbox ◼ As shown in Figure 5-6, use Mounting Accessory-A and Mounting Accessory-B to install Mounting Accessory-C on the wall;...
- Page 23 Sonic Series AC EV Charging Station User Manual Fig. 5-6 Fixed the Wall-mounting accessories-D As shown in Fig. 5-7, Use tools to open decorative covers and sealing covers. Fig. 5-7 Open the lid As shown in Figure 5-8, First step: install the wall box on the wall in the direction of the arrow;...
- Page 24 Sonic Series AC EV Charging Station User Manual Fig. 5-8 Install the Wall Box Step3: Wiring ◼ - 22 -...
- Page 25 Sonic Series AC EV Charging Station User Manual [A] Rubber grommet [B] Input power cable [c] Charging cable Fig. 5-9 Wiring As shown in Fig. 5-9, Pass the prepared power cable through the rubber grommet [A]; Remove the 12mm insulation layer on the wire;...
-
Page 26: Empty Socket
5.5. Empty socket Sonic series AC EV charging station config a type 2 charging connector. When the charging station is in standby state, please plug the charging connector in the empty connector socket in order to protect the charging connector. Please use expansion screws to fix this empty socket at a suitable position beside the charging station. -
Page 27: Operation
Human-Machine Interface Overview 6.2.1. As shown in Fig. 6-1, Sonic series product is configured with multiple human-machine interfaces. Screen display area: A screen used to display system status Swipe card area: Swipe the RFID card to charging Indicator lights: It is used to show indicate system status Charging control button: Start or stop charging by press for Button-controlled charging Fig. - Page 28 Sonic Series AC EV Charging Station User Manual ②Connection status ③Charging status ④ System failure - 26 -...
- Page 29 Sonic Series AC EV Charging Station User Manual ⑤System upgrade ⑥Scan the QR code binding RFID reader 6.2.3. In general, the charging station is equipped with RFID card reader as standard, and the charging process can be started and stopped by using the RFID card (shown as Fig. 6-2) configured with the host.
- Page 30 Sonic Series AC EV Charging Station User Manual Fig. 6-2 RFID card LED indicators 6.2.4. The LED indicators on the panel are used to indicate the status of the charging station and the various combinations of indicators are described as below.
-
Page 31: Configure Parameters
Sonic Series AC EV Charging Station User Manual Stop charging: press button again will end the charging, when EV is in charging. ◼ 6.3. Configure parameters Taking the configuration of charging station parameters by laptop as an example, it is introduced as... -
Page 32: Start Charging
Sonic Series AC EV Charging Station User Manual Fig. 6-5 Set parameters to config the EV charging station After setting, click the “SAVE” button to save the settings, and click the “RESTART” button to restart charging station for settings take effect. Enter your WiFi name and password in the page. -
Page 33: Normally Stop Charging
Sonic Series AC EV Charging Station User Manual Fig. 6-6 Plug into EV socket For the charging control mode of “Card-controlled” or “APP-controlled”, you can control charging process by swipe RFID card or APP after charging connector plug in. ▷ If you want to scan QR code on the screen to start charging,... -
Page 34: Abnormally Stop Charging
Sonic Series AC EV Charging Station User Manual charging will stop. When the charging is end, please unplug the charging connector and plug back to the empty socket of charging station. 6.6. Abnormally stop charging Forced fault stop: A fault stop initiated by the onboard charger of vehicle. - Page 35 Sonic Series AC EV Charging Station User Manual LED indicator Fault code Handling method information ⚫ LED flash: Fault code 15: ⚫ Check whether the charging station is covered or Red×1+Yellow×5 Over-temperature installed in a high temperature environment. protection LED indicator...
-
Page 36: Maintenance
Sonic Series AC EV Charging Station User Manual LED indicator Fault code Handling method information ⚫ LED flash: Fault code 24: ⚫ The RCD is damaged and needs to be returned to Red×2+Yellow×4 ⚫ RCD fault the factory for repair. -
Page 37: Warranty Agreement
Sonic Series AC EV Charging Station User Manual WARRANTY AGREEMENT The scope of warranty refers to the product itself. The warranty period is 12 months. During the warranty period, the company will repair the product free of charge in case of failure or damage (determined by the company's technical personnel) under normal use. - Page 38 Sonic Series AC EV Charging Station User Manual We, declare that the construction of the device described in the following complies with the relevant stated below. Relevant EC directives: Directive 2014/53/EU on radio equipment and telecommunications terminal equipment (RED Directive 2014/53/EU).
-
Page 39: Compliance Statement Of Weee
Sonic Series AC EV Charging Station User Manual COMPLIANCE STATEMENT OF WEEE This product cannot be discarded at will when it is abandoned. It must be collected separately for special treatment. - 37 -...
Need help?
Do you have a question about the Sonic Series and is the answer not in the manual?
Questions and answers