1. Manuals
  2. Brands
  3. LOBSTER Manuals
  4. Industrial Equipment
  5. ARF-810E
  6. Instruction manual

LOBSTER ARF-810E Instruction Manual

Auto rivet feeder
Hide thumbs Also See for ARF-810E:
Table of Contents

Advertisement

Quick Links

Download this manual
Professional model of air riveter to install blind rivets.
Professional model of air riveter to install blind rivets.
Thank you very much for purchasing "LOBSTER" air riveter. To ensure correct operation, please read
this instruction manual carefully, and keep it in a safe place for later reference.
Thank you very much for purchasing "LOBSTER" air riveter. To ensure correct operation, please read
Professional model of auto rivet feeder to install blind rivets.
this instruction manual carefully, and keep it in a safe place for later reference.
･Thank you very much for purchasing "LOBSTER" auto rivet feeder. To ensure correct operation,
please carefully read this instruction manual and keep it in a safe place for later reference.
･This is Original instructions.
MANUFACTURER
MANUFACTURER
MANUFACTURER
International Marketing & Sales Division
12-8 Shijo-cho, Higashi-Osaka City
Osaka 579-8053, Japan
Telephone: +81(72)981-7466 Telefacs: +81(72)981-9420
URL https://www.lobtex.co.jp/
AIR RIVETER
ＡＵＴＯ ＲＩＶＥＴ ＦＥＥＤＥＲ
AIR RIVETER
INSTRUCTION MANUAL
INSTRUCTION MANUAL
INSTRUCTION MANUAL
BUILT-IN ON-DEMAND
VACUUM SYSTEM
ＡＲＦ－８１０Ｅ
R1A1
R1A1
CONTENTS
ＣＯＮＴＥＮＴＳ
CONTENTS
INTRODUCTION................................. １
IMPORTANT SAFETY
INSTRUCTIONS.................................1
IMPORTANT SAFETY
INSTRUCTIONS.................................1
NOMENCLATURE .............................3
NOMENCLATURE...........................
NOMENCLATURE .............................3
TECHNICAL DATA ...........................4
TECHNICAL DATA.............................. ７
TECHNICAL DATA ...........................4
PREPARATION BEFORE USE .......5
PREPARATION BEFORE USE............1 ０
PREPARATION BEFORE USE .......5
OPERATING THE AIR RIVETER ....7
HOW TO OPERATE...........................１１
OPERATING THE AIR RIVETER ....7
MAINTENANCE .................................8
CHANGE SIZE OF RIVETS..................１３
MAINTENANCE .................................8
STORAGE........................................12
STORAGE........................................12
PARTS TABLE ................................13
PARTS TABLE ................................13
MAINTENANCE.............................. １ ６　
ORDERING PARTS .........................14
ORDERING PARTS .........................14
ORDERING PARTS........................... １ ６
TROUBLESHOOTING .....................15
TROUBLESHOOTING .....................15
TROUBLESHOOTING..................... １ ７
PARTS TABLE................................. １ ８
PRINTED IN JAPAN
BUILT-IN ON-DEMAND
VACUUM SYSTEM
６
Ｎｏ .AF810ES11000
PRINTED IN JAPAN
PRINTED IN JAPAN

Advertisement

Table of Contents
loading

Related Manuals for LOBSTER ARF-810E

Summary of Contents for LOBSTER ARF-810E

  • Page 1: Table Of Contents

    Professional model of air riveter to install blind rivets. MODEL CHANGE AND PARTS LIST… ２ ２ Thank you very much for purchasing “LOBSTER” air riveter. To ensure correct operation, please read this instruction manual carefully, and keep it in a safe place for later reference.

  • Page 2: Introduction

    ● INTRODUCTION ・ This is the feeder for "LOBSTER" brand blind rivet which can be used with "LOBSTER" brand 　riveter. It is not designed, produced or sold for any other purpose. ・ This instruction manual shows how to operate and perform maintenance and inspection in order to use safely and efficiently.

  • Page 3: Important Safety Instructions

    安全上のご注意 安全上のご注意 ● IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS ◆ Be sure to read the following Important Safety Instructions carefully and make sure that you ◆ご使用前に、この「安全上のご注意」すべてをよくお読みのうえ、十分理解されて正しく使用して ◆ご使用前に、この「安全上のご注意」すべてをよくお読みのうえ、十分理解されて正しく使用して understand them thoroughly before using this machine. ください。 ください。 ◆ Always wear protective goggles while using the machine. ◆...
  • Page 4 ⚠ WARNING ７.Avoid a sudden start of the machine. Before connecting it to the power supply, confirm that the switch is not turned on. ８.When replacing parts or accessories, follow the steps specified. ９.Be sure to use the provided AC adapter for the power supply. １０.Wear clothes appropriate for work.
  • Page 5 ・ If you find any fault, arrange to have an inspection and a repair. ・ Repair work should only be carried out by a qualified technician. Please contact your nearest “LOBSTER” distributor, representative, or direct to Lobtex Co.,Ltd.,Osaka. If the machine is 　　...
  • Page 6 ⚠ CAUTION ２１.Check for damage to respective parts prior to use and arrange for a repair by a competent person if any damage is found. ・ Check thoroughly for damage to respective parts prior to use and ensure that the machine operates normally and the specified functions can be provided.

  • Page 7: Nomenclature

    ● NOMENCLATURE ◇ Substance Rivet slot Cover unit Front panel Warning seal Supply port Power entry point External output （Frame Head Holder） ◇ Front panel （operation buttons） LED(green) LED(red) Start button Count display Lock button Lock button Power switch Button（Λ） Button（＞） Reset button ■...
  • Page 8 ● TECHNICAL DATA　 ◇ MODEL ＡＲＦ－８１０Ｅ－□－□ F r a m e h e a d holder diameter ２１ ２１ｍｍ R i v e t d i a m e t e r ２３ ２３ｍｍ ２４ ２．４ｍｍ (Type ３） ３２ ３．２ｍｍ (Type ４） ４０...
  • Page 9 ◇ Applicable riveter Use Ｒ ２ Ｂ １ ・ Ｒ ２ Ａ １ ・ Ｒ １ Ａ １ ・ Ａ Ｒ ２ ０ ０ ０ Ｍ Ｖ ・ Ａ Ｒ Ｖ ０ １ １ Ｍ ・ Ａ Ｒ Ｖ ０ １ ５ Ｍ Ｘ ・ Ａ Ｒ Ｖ ０ ２ ２ Ｍ ＡＲＶ０２５Ｍ...
  • Page 10 ◇ External output Counting data can be output to an external device such as a PLC. The connecting way is as below. ８　　　　　 　←　　　　　　　 １ ＊ The maximum electric current is 7mA. ＊ Do not connect to vacant terminals. ＊ Incorrect connection may cause failure. Function Terminal No for fixing screws...
  • Page 11 ● PREPARATION BEFORE USE Open the rivet slot and remove the rail spacer １ １ (for transportation). Rail spacer ＊ Rivets cannnot be supplied if the spacer is left on the rail. In addition, there is a risk of parts damage. Connect a power cable to AC adapter and make it plugged in.

  • Page 12: How To Operate

    ● HOW TO OPERATE Follow the steps below to make various settings and changes. (Refer to page 6 for button layout.) ＊ For details of each operation mode, see P.7. ◇ Change operating mode MODE CHANGE Input digit shift Change the value ０　０　０　０...
  • Page 13 ◇ How to reset the number of counts Press and hold the reset button (2 seconds). The count number returns to the １ １ initial value. ＊ When using in total count mode, the count number becomes "0000". ＊ When using the preset count mode, the count number becomes the set value. ◇...
  • Page 14 ◇ How to open the front panel When you want to check the supply port, or any trouble such as rivet clogging occurs near the supply port, open the front panel and check. Also, make sure power turned off, to do this. Press the lock button (2 places) to release the button.
  • Page 15 Remove the rivet rail unit. １ ３ ＊ Use a hexagonal key wrench(3 mm) ＊ Loosen the stainless steel screw in the dashed line. (2 locations) Rivet rail unit Enlargement of the circled part in the left figure Install the rail unit of the size to be replaced and the separator unit in reverse order. １...

  • Page 16: Change Of The Riveter Used

    ● CHANGE OF THE RIVETER USED When changing the riveter to be used, it is necessary to replace the frame head holder. Follow the steps below to replace. Be sure to turn off the power before performing this work. ＊ Refer to P8 for replacement, and select the frame head holder that matches the riveter you use. ＊...

  • Page 17: Storage

    ● MAINTENANCE Perform the following tasks and checks on a daily basis. Be sure to turn off the power before performing this work. 1.Cleaning each parts. ● If there is dirt, wipe it off with a waste cloth. ● Remove dirt and dust from the area around the rivet insertion port and the supply port by using an air blower, etc.
  • Page 18 If a problem occurs, check the following.If the problem persists after checking the items in the table be- low, contact your nearest “LOBSTER” dealer or contact Lobtex. In making any inquiries about this product or requests for repair work, first check the troubleshooting items below and then make a note of the model number, the usage conditions and the trouble symp- toms in as much detail as possible.

  • Page 19: Parts Table

    ● PARTS TABLE ＡＲＦ－８１０E main unit ２３ ７ ２１ ２４ ２５ １９ １３ ２７ １７ １８ ２２ １４ ６ １５ １２ ５ １７ ３ ８ ２８ １８ ９ １１ ２９ ２６ １０ １６ ４ １ ３１ ３２ ３０ ２０ ２８ ６...
  • Page 20 Index Ｎｏ． Part name Code Ｎｏ． Material Drum unit Stainless １ Supply port unit Steel ２ 69083 Rivet rail unit （Type ３） Steel、 Stainless ３-A 69097 Rivet rail unit （Type ４） Steel、 Stainless ３-B 69098 Rivet rail unit （Type ５） Steel、...
  • Page 21 Supply port unit １５ ２７ １３ ２２ １９ ４０ ２５ １６ ３３ １９ ２８ ２４ ３２ ３７ ９ １４ １２ １９ ２２ ２２ ３８ １９ ３ ４２ ４ １ ７ ２２ ３０ １９ ４４ ６ １８ １７ １９ ２２ ２０ ３５...
  • Page 22 Index Ｎｏ． Part name Code Ｎｏ． Material Pusher guide Steel １ 69052 Rack gear retainer plate Steel ２ 69050 Supply unit pusher plate Steel ３ 69056 Finger Steel ４ 69057 Slide base L Steel ５ 69065 Slide base R Steel ６...

  • Page 23: Model Change And Parts List

    ● MODEL CHANGE AND PARTS LIST Models are changed as shown in the table below due to changes in rivet diameter and frame head diameter. You can check the purchased (in use) model by referring to P23. Model Model number Required optional parts number after converting...
  • Page 24 How to check current model number. ◇ Check the rivet diameter and frame head holder diameter to be used in ① to ③ , and apply it to the model in ④ . ① Rivet rail unit 　　Displays the system corresponding to the rivet diameter used. Enlargement of the display part　　...
  • Page 25 ＭＥＭＯ ２４...
  • Page 26 １２...
  • Page 27 １１...

Table of Contents