Table of Contents
Advertisement
Inserting and Removing an SD Card (Optional)
The Camcorder comes with an internal memory which allows you to store photos and videos. You can
expand the memory capacity by using an optional SD memory
card.
1. Insert the memory card into the slot. Please refer to the figure
on the right side.
2. To remove an installed SD card, press the card inwards to
release it.
3. When the card pops out, gently remove it from its slot.
4. Recommended memory capacity: 1GB or above.
Note
• When a memory card is fitted, videos/photos are saved
on the card rather than on the built-in memory.
• Protecting Data on an SD Card: SD Card is read-only
when it is locked. No photos or videos can be recorded
when the SD card is locked. Make sure the lock is on
the writeable position before recording any media.
Writeable
position
8
Write-Protected
Position
Advertisement
Table of Contents
