Prevue Pet Products 3251BLK Assembly Instructions

5
Install Perch — Perch extends from left
side panel to right side panel, aligned on
center vertical wire (see detail [e]).
Install Cups/Holders — Insert cup
holders into cup doors on (L2) panel, and
insert cups into holders (see detail [f]).
Add Grille & Tray — Rotate the windbell
lock out of the way and slide removable
grille (G) into the top channel tracks and
tray (T) into bottom channel tracks.
6
The side seed guard (SG1) panels have tabs
extending down from the bottom corners which
correspond to sleeves along (F) & (B) panel
rail sides.
The front seed guard (SG2) has notches along
the bottom edge, corresponding to heavy vertical
rails on the front panel.
Slide the tabs on the left side (SG1) seed guard
into sleeves along the (F) & (B) panel rail sides.
Repeat for the right side (SG1) seed guard.
Hold the front (SG2) seed guard in place, align
holes at corner contact edge and secure front to
side seed guards with screw & nut pairs. Repeat
for back (SG3) seed guard.
$
Your cage is now fully assembled!
Made in China for Prevue Pet Products, Inc., Chicago IL USA
SG1
SG3
SG2
SG1
@
www.prevuepet.com 800 243-3624 customerservice
cage assembly instructions
Parkway Cage
Models: #3251BLK
#3252BLK
getting started!
G
READ THESE NOTES FIRST:
Assembly steps & parts lists are exactly the same for both the
T
#3251 & #3252. The only differences are in dimensions.
• Enlist A Friend: These cages are easy to assemble, but for best
results, you may want to enlist a friend to help.
• Count Hardware & Review All Parts: If any screws are
missing, or if parts are damaged during shipping, please contact
Prevue Customer Service immediately.
parts
B
L2
L1
KEY:
L = Left panels
B = Back panel
C = Center (Top) panel
R = Right panels
F = Front panel
prevuepet.com 3251/3252 — 03 /12
#3251 #3252
exterior: 18"L × 18"W × 48½"H exterior: 24"L × 22"W × 52¾"H
w/seed guards: 26¼"L × 26¼"W w/seed guards: 32½"L × 30½"W
interior: 17"L × 17"W × 32¾"H interior: 23½"L × 21¼"W × 37"H
wire: [gauge] 8 & 8 [spacing] ½" wire: [gauge] 8 & 8 [spacing] ½"
• Tools: You will only need an allen wrench (provided). If you use
your own tools, please note: Prevue
tools. Screws can be over-tightened and parts may be damaged or
stripped. Prevue is not responsible for this type of damage.
Review these instructions thoroughly before attempting to assemble
the cage. If you require assistance, please contact Prevue Customer
Service at 800.243.3624 or customerservice
{ 8} hex head screws
C
{ 8 } short hex head
screw & nut pairs for
seed guard
R2
{ 1 } allen wrench
F
R1
recommend power
DOES NOT
@
prevuepet.com
{ 4 } rolling casters
{ 2 } cup hangers & cups
{ 1 } wood dowel perch
G
T
SG3
SG1
SG1
SG2