GlucoCheck Test Strip Instructions For Use

Warnings

For in vitro diagnostic use (for use outside of the body only).
For single use only.
Healthcare professionals and other users testing multiple patients with this system should handle
everything that has come into contact with human blood carefully to prevent transmitting infectious
diseases, including sanitized objects.
sites is not advised as the results might not be a true reflection of the physiological blood glucose level. It
advice.

Intended Use

glucose levels to be measured by yourself at home or by healthcare professionals. It uses fresh whole blood
samples from the finger, palm, upper arm and forearm. This system is not intended for use in the
diagnosis or screening of diabetes mellitus, nor for the use on newborns.

About Alternative Site Testing (AST)

IMPORTANT:
NOT
rub the puncture site for approximately 20 seconds
before obtaining a blood drop as described in your Blood Glucose Monitoring System Owner's Manual.

Limitations

blood concentration do not significantly affect blood glucose test results.
glucose tests.
affect results at higher levels.
produce elevated glucose results:
Summary of substances and concentrations in excess of limitation with interference
Ascorbic Acid

Storage and Handling

IMPORTANT:
first opened it.
strip.
Strip Appearance
1 1. Absorbent Hole
Test Strip
2
2. Confirmation Window
of the strip.
3. Test Strip Handle
3
Hold this part to insert the test strip into the slot of the glucose meter
4. Contact Bars
further.
4
ATTENTION
The front side of the test strip should face up when inserting the test strip.

Testing Your Blood Glucose

PLEASE WASH AND DRY YOUR HANDS BEFORE PERFORMING ANY TESTING.

STEP 1

Insert the test strip fully into the slot of the meter until it will go no further.
When the strip is fully inserted, the meter will switch on automatically and

STEP 2

drop with the absorbent hole of the test strip, and wait until the confirmation
window is fully covered. Do NOT
will start counting down.

STEP 3

After a few seconds, the meter will display your blood glucose level.
by removing the test strip and throw away the used test strip.
EXAMPLE ONLY!
your local infection control procedures.

Reading Your Result

Reference values

Fasting and before meal
Please consult your healthcare professional regarding the appropriate blood glucose reference range for you.

Questionable or inconsistent results

If your test results are unusual or inconsistent with how you are feeling:
PLEASE NOTE: Unusually high or low blood glucose levels may be symptoms of a serious medical condition.
If most of your results are unusually high or low, please contact your healthcare professional.
Quality Control Testing
IMPORTANT:
Chemical Components
> A. niger
Additional Information for Healthcare Professionals
involving patient blood samples. Use fresh whole blood samples only. Healthcare professionals may use test
strips to test capillary whole blood.
Accuracy
method results.
GlucoCheck Logic
fully inserted into the test slot.
GlucoCheck Classic
GlucoCheck Advanced
GlucoCheck-i
GlucoCheck EVOLVE
Note