Specification; Safety Instructions; Manufacturer's Declaration - FeinTech ABT00102 Instructions Manual

Specification

Bluetooth 5.0 Chipset:
Supported profiles:
Supported Codecs:
ƒ RX-Mode:
ƒ TX-Mode:
RF output power:
Digital to analog conversion:
Analog to digital conversion:
Channel separation /Crosstalk: -89 dB
Power consumption:
Operating temperature:
Dimensions:
Bluetooth Class II:
Bluetooth frequency:
Qualcomm aptX & CSR8675 are products of Qualcomm Technologies, Inc., Bluetooth is a registered trademark of
Bluetooth SIG

Safety Instructions

Use the device only in environments where Bluetooth wireless technology is permitted. Do not use the device if it has
been damaged or exposed to liquids. Do not expose the device to extreme temperatures, fire or humidity. Keep the
device, packaging and accessories away from children and pets to prevent accidents and suffocation.

Manufacturer's declaration

Herewith Spreewald Kommunikationstechnik GmbH declares that the radio system type ABT00102 complies
with the directive 2014/53/EU and further declares that this product is in conformity with the rules of the EU
directive (including all applicable amendments) 2011/65/EU „RoHS2".
The full text of the EU Declaration of Conformity is available at the following Internet address
https://feintech.eu/ce
Electronic products contain valuable raw materials and must not be disposed of with normal household waste.
At the end of its service life, please bring the device to your local recycling facility.
FeinTech is a registered Trademark of Spreewald Kommunikationstechnik GmbH,
Radensdorfer Hauptstr. 45 a • 15907 Lübben (Spreewald) • Germany • info@feintech.eu • +49 3546 239 8855
CSR 8675
A2DP, AVRCP
aptX-HD, aptX Low Latency, aptX, SBC
aptX-HD, aptX Low Latency, aptX, SBC
max. 5.90 dBm at GFSK-Modulation (3.89 mW)
16 bit / max. 48 kHz / SNR > 92 dB
16 bit / max. 96 kHz / SNR > 96 dB
max. 1,5 W / 300 mA / 5 V DC
-10°C to +55°C
134 x 74 x 27 mm
Receiving range maximum 15 m
Transmission range maximum 50 m (outdoors)
2402–2480 MHz