Equity NIGHTVISION 30330 Manual

NIGHTVISION®
LCD A L A R M
1. Hour button
2. Minutes button
3 4
3. Time Set button
2
4. Alarm Set button
5
1 5. Alarm ON/OFF switch
6. Light Sensor
7
7. Snooze/Light button
6
MODEL: 30330
DC: 042723
P OWE R UP
Install 3 "AA" batteries (not included) into the clock.
S E T T I M E
1. Hold the TIME SET button and press the HOUR button to set the hour.
2. Hold the TIME SET button again and press the MINUTES button to set
the minutes.
Note: The PM Indicator will appear when you advance to PM time.
S ET A L A R M TI M E
1. Hold the ALARM SET button and press the HOUR button to set the
hour.
2. Hold the ALARM SET button again and press the MINUTES button to
set the minutes.
Note: The PM Indicator will appear when you advance to PM time.
ACT I VAT E / D E AC T I VAT E A L A R M
• Slide the ALARM ON/OFF switch to ON to active the alarm. The Alarm
Icon will show. The alarm will sound for 60 seconds at the selected
time.
• Slide the ALARM ON/OFF switch to OFF to deactive the alarm. The
alarm icon will disappear. The alarm will be off permanently.
• When the alarm sounds, press the SNOOZE/LIGHT button to silence a
sounding alarm for 5 minutes. Zz will show while snoozing.
Page 2
NIGH TVISIO N® TEC H NO LO GY
When the light level is extremely low the Light Sensor automatically
illuminates a dim glow behind the display. This allows you to see the time.
When the room brightens the Light Sensor will automatically turn off the
glow to save battery power.
Press the SNOOZE/LIGHT button to activate the backlight for a breif time.
POW ER R EQU IR EMENTS & DIMEN SIO NS
Power Requirements: 3 "AA" batteries (not included)
Dimensions:
4.75" L x 3.75" W x 2.40" H (12.06cm L x 9.52cm W x 6.09cm H)
4.75"
12.06cm
2.40"
6.09cm
3.75"
9.52cm
Page 3