CONTENTS: IMPORTANT SAFETY INFORMATION……………………… MACHINE OVERVIEW………………………………………… THE GRIP AND NEEDLE DEPTH ADJUSTMENT…………. EXCHANGEABLE BATTERIES………………………………. THE BATTERY REPLACEMENT…………………………….. BASIC MACHINE CONTROL………………………………… SCREEN OVERVIEW………………………………………….. MEMORY PRESETS…………………………………………… DIGITAL SOFTNESS…………………………………………… DIGITAL SOFTNESS CONTROL……………………………… MAIN MENU…………………………………………………….. MAIN MENU PARAMETERS………………………………….. TIMER MENU……………………………………………………. SCREEN COLOR AND STYLE………………………………… DIFFERENT SCREEN STYLES………………………………..
Only use the original charger to charge the battery. The risk of fire cannot be excluded if you do not use an original charger. • Only use the battery in connection with original Cyber tattoo machines. • Only use the supplied battery type NCR18500A. Any other batteries may cause severe injuries and a risk of fire.
Machine frame parts are made from solid rods of high grade aluminium, then anodised. The CYBER has a built-in color display to Machine grip show information and make it easier for the user to control the device. Users can fully...
THE GRIP AND NEEDLE DEPTH ADJUSTMENT The CYBER comes equipped as standard with 33mm grip. The Grip is safe to be sterilised in an autoclave at temperatures not higher than 135° Celsius or also suitable to be sprayed with cold sterilisation products.
EXCHANGEABLE BATTERIES Contact pin The CYBER machine is designed for use with standard rechargeable Panasonic Li-ion batteries (model 18500). That allows easy to service or replace the battery if it became worse. And also safe to store the machine on a...
THE BATTERY REPLACEMENT 1. Unscrew the battery cap. 2. Insert a charged battery “+” down. 3. Screw the battery cap back on to the rear end of the machine. - 7 -...
Attention: We do not recommend turning on and run the motor with no Step up button needle cartridge attached to the machine. The CYBER uses a slider system mechanism without springs, so cartridge needle membrane works as a back spring here and ensures stable, smooth and silent operation.
SCREEN OVERVIEW VOLTAGE CONTROL SCREEN Active or Battery level Total timer Voltage (5.0V - 9.5V) The machine motor is turned on Digital softness preset, Chosen memory where ‘0’ is no softness preset, 1 of 4 and ‘9’ is max. softness (A,B,C,D) - 9 -...
MEMORY PRESETS The Cyber has a feature to automatically save user’s voltage and digital softness as 1 of 4 presets: A , B , C or D. Users can configure every preset to their preference. To configure the preset, simply change the voltage and/or digital softness and all changes will be automatically saved to the selected preset.
DIGITAL SOFTNESS CONTROL User can only control the Digital Softness while machine motor is running. 1. Press button to turn on the machine motor. 2. Press and hold the same button for 2 seconds to enter to Digital Softness control menu. 4.
MAIN MENU Users can fully configure the machine to their preference in Main Menu. 1. Press buttons to enter the Main Menu. 2. The following screen will appear: 3. Switch between parameters using buttons. 4. To enter or change the parameter press button.
TIMER MENU 1. Press button to enter the Timer Menu. Total timer, starts automatically when user turns on the machine. Run timer, counts the machine motor run time. Turn OFF the timer. 1st page Timer Menu 2. Select which timer to use on the main screen. 3.
SCREEN COLOR AND STYLE Press button to switch between 14 different screen color styles. SCREEN COLOR Press button to switch between 7 different screen styles. SCREEN STYLE - 15 -...
DIFFERENT SCREEN STYLES Voltage Control Voltage Control screen screen Digital Softness Digital Softness Voltage Control screen Digital Softness - 16 -...
2nd MENU PAGE Press button to change screen brightness. Press button to change button sound. 3 modes: louder, quieter and no sound. Press button to change sleep mode. 3 modes: short, medium and long. Controls screen dimming when user does not press any button and full machine shutdown, when the machine is not in use.
TECHNICAL SPECIFICATIONS Battery type Lithium-ion Dimension, D x L 33mm x 125mm Battery dimensions DxL 18.15mm x 49.36mm Weight (with battery) 190g (with battery) Rated capacity value 1900 mAh Operating voltage 5.0 - 9.5 Volts Charging method CC-CV Needle stitches/second 55-135 Charging voltage 4.2 V...
WARNING SIGNS The CYBER has smart testing software, that checks the machine and informs about one of the following problems. This software stops or does not allow to start the motor if one of these problems appear for the user and machine safety reasons.
SERVICE AND MAINTENANCE The CYBER comes pre-lubricated from factory and does not require additional lubrication. Do not use any type of oil for lubrication. Any changes or modifications not approved by the manufacturer could void the warranty.
WARRANTY External aluminium machine body parts (Grip, Machine body) are covered by 2 years warranty. The motor and electronic components are covered by 1 year warranty from date of purchase. All sliding internal parts, cam bearing, batteries, screws, O-ring, Click ring and threads are subject to wear.