Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Tool Shed TSFS
Summary of Contents for Tool Shed TSFS
- Page 1 TOOLSHED FILE SANDER TSFS www.thetoolshed.co.nz...
- Page 2 OPERATION MANUAL PRODUCT DETAILS PRODUCT ToolShed File Sander MODEL NO. TSFS ISTRIBUTED BY NOTE: This manual is only for your reference. Due to the continuous improvement of the ToolShed products, changes may be made at any time without obligation or notice.
-
Page 3: Table Of Contents
OPERATION MANUAL C O N T E N T S: Specifications ............................4 Service ..............................4 Identification ............................5 Safety Instructions..........................6 Tips for Optimum Use ..........................7 Assembly ..............................8 Operation .............................. 10 Maintenance and Cleaning ........................12 www.thetoolshed.co.nz... -
Page 4: Specifications
OPERATION MANUAL SPECIFICATIONS Model S1C-ZP-125 Rated Voltage 230-240V ~ 50Hz Sound Pressure Level 82dB Sound Power Level (93 ＋ 3)dB(A) (k=3) Hand Arm Vibration 3.8m/s2 Rated Power Input 400W No Load Speed 1070-1650 m/min (23000-15000 r/min) Sanding Belt Size 455 x 8mm | 455 x 13mm Max Sanding Depth 125mm Insulation Class of Engine... -
Page 5: Identification
OPERATION MANUAL IDENTIFICATION 1 ． On ／ off switch 2 ． Lock-on button 3 ． Secondary handle 4 ． Straight arm 5 ． Belt tensioning lever 6 ． Belt tracking knob 7 ． Variable speed control knob 8 ． Dustbag 9 ．... -
Page 6: Safety Instructions
OPERATION MANUAL IMPORTANT INFORMATION GENERAL SAFETY GUIDELINES WARNING READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS. Failure to follow instructions and warnings could lead to serious injury, electric shock, or fire. Save ALL warnings and instructions for future reference. WORK AREA SAFETY Ensure that your work area is kept well-lit and clean. -
Page 7: Tips For Optimum Use
OPERATION MANUAL Avoid body contact with grounded or earthed surfaces. Surfaces such as radiators, ranges, pipes, and refrigerators can increase risk of electric shock due to your body being earthed or grounded. POWER TOOL AND MACHINERY USE AND CARE Use the correct tool for the job. Forcing a tool to do a job it was not designed for increases the risk of accident or injury. -
Page 8: Assembly
OPERATION MANUAL ASSEMBLY BEFORE ASSEMBLY – Make sure that the tool is switched off and unplugged. FITTING AND REMOVING SANDING ARMS (fig. B) Before first use, you must fit the sanding arm to the tool. A straight arm (13mm sanding width) is supplied along with the following: A narrow arm (6mm sanding width) for intricate work. - Page 9 OPERATION MANUAL ADJUSTING THE SANDING BELT TRACKING (fig. D) Switch the tool on. Turn the belt tracking knob (6) as required until the sanding belt runs straight along the length of the arm. FITTING AND REMOVING THE DUST BAG (fig. E) Make sure to remove the dust bag before using the tool on metal workpieces.
-
Page 10: Operation
OPERATION MANUAL OPERATION NOTE: Let the tool work and it’s own pace and do not overload it. VARIABLE SPEED CONTROL (fig. F) The variable speed control allows you to adapt the speed of the tool to the workpiece material. Use a low-speed setting when using a fine grit, when working with plastics or ceramics and when removing painted or varnished surfaces. - Page 11 OPERATION MANUAL CRANKED ARM (fig. H) Use section A for grooving or sanding in the centre of workpieces and in confined areas. Use section B for curved surfaces. STRAIGHT ARM (fig. I) Ise the normal or narrow arm for general use, for slotting, and for making joints. NARROW ARM (fig.
-
Page 12: Maintenance And Cleaning
OPERATION MANUAL MAINTENANCE & CLEANING Before cleaning or performing any maintenance, you must ensure the tool is switched off and disconnected from the power supply. Compressed air is the most effective way to clean this tool. Always wear safety goggles when cleaning tools with compressed air.
Need help?
Do you have a question about the TSFS and is the answer not in the manual?
Questions and answers