Table of Contents
Advertisement
with insulating silicone (B) and wipe off any
excess. If for any reason the hob needs to be
removed, cut the silicone using a cutter before
Standard and Flush mounting (mm)*
L (mm)
300
300
* The image on the left shows the Standard opening, while the one on the right shows the Flush
opening.
Connection positions (mm)
Electrical connection
Mounting
See General safety instructions.
Over built-in oven unit
The clearance between the hob and the kitchen
units or other built-in appliances must be enough
to ensure sufficient ventilation and air discharge.
If installed above an oven, a space must be left
between the bottom of the hob and the top of
91477A765/A
X (mm)
Y (mm)
490
270
490
270
attempting to remove it (C).
G (mm)
-
514
the appliance installed below.
1 Opens on bottom
2 Opens on bottom and back
It is also necessary to maintain a distance of
approximately 57 mm from the front panel of the
oven to the front of the appliance, as shown in
H (mm)
-
304
INSTALLATION - 31
Advertisement
Table of Contents
