Selecting A Supported Display Mode - Lenovo ThinkVision T34w-30 User Manual

Selecting a supported display mode

The display mode of the monitor uses is controlled by the computer. Therefore, refer to your
computer documentation on how to change display modes.
The image size, position and shape might be changed when the display mode changes. This
is normal and the image can be re-adjusted using automatic image setup and the image
controls. Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD
or Curved Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to reattach
the CRT monitor temporarily until you have re-configured the system; preferably to 3440 x
1440 at 60 Hz, which is a common display mode.
The display modes shown below have been optimized at the factory.
Table 2-3 Factory set display modes
Timing
720x400
640x480
640x480
800x600
1024x768
1280x720
1280x800
1280x1024
1440x900
1600x900
1680x1050
1920x1080
2560x1080
3440x1440
Refresh rate(Hz)
70 Hz
60 Hz
75 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
Chapter 2.Adjusting and using your monitor 2-6