Advertisement
S1
Electricity measure Smart
control
Programmable Socket
(lnstruction Manual)
This
equipment
is
used for Smart on-off control,
safety
protection
control,
Prog
ra
mmable control,
I
nternet
of
Th
i
n
gs
data
transmission and wireless control, accumulative power,
calculation
of
electricity
billAnd measure detailed parameters
such as current voltage, current, power and
frequency
Advertisement
Table of Contents
Need help?
Do you have a question about the S1 and is the answer not in the manual?
Questions and answers
How can I read the KWH of an electrical equipment
The ATORCH S1 electrical equipment has a display screen that shows energy measurements. To read the kWh (kilowatt-hours) on the device, follow these steps:
1. Power on the Device: Ensure the ATORCH S1 is properly connected and powered.
2. Navigate the Display: The device has a screen that shows various electrical parameters.
3. Locate the kWh Reading: The energy consumption in kilowatt-hours should be displayed on the screen, typically labeled as "kWh" or similar.
4. Check Measurement Mode: If the device is set to simple measurement mode, it will display energy usage directly.
5. Use the App (Optional): If the device supports an app, you can check energy consumption via the app for more detailed information.
Ensure the device is properly configured to measure and display energy usage accurately.
This answer is automatically generated