Summary of Contents for HighSecLabs HDC21364
- Page 1 Audio Diode Configuration Tool | USER MANUAL Table of Contents SECTIONS Audio Diode Configuration Tool User Manual KVM Remote RS-232 Control | QUICK SETUP GUIDE HDC21364 Rev. 1.1...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Introduction Software and Hardware Requirements Connecting the Audio Diode to the Dedicated Configuration PC Installing and Running the Audio Diode Configuration Tool Configuring the Audio Diode Audio Diode Configuration Tool | USER MANUAL... -
Page 3: Introduction
INTRODUCTION This manual shows how to use the Audio Diode Configuration Tool to configure the control buttons behavior on different Audio Diode models. Note: This manual is not applicable for Audio Diode models Note: This manual is not applicable for Audio Diode models without without buttons (FA10A-4 and FA10B-4). -
Page 4: Software And Hardware Requirements
Software and Hardware Requirements Software Prerequisites To operate, the Audio Diode Configuration Tool requires the following software running on the dedicated configuration PC (not the host PC!): Audio Diode Configuration Tool download • Windows 10 Operating System • NET Framework release 4.6.1 or higher •... -
Page 5: Connecting The Audio Diode To The Dedicated Configuration Pc
Connecting the Audio Diode to the Dedicated Configuration PC Note: Before connecting the Audio Diode to the dedicated Check the Device Manager list to see which COM port Note: Before connecting the Audio Diode to the dedicated configuration PC, make sure it is already connected to the host configuration PC, make sure it is already connected to the host PC, via was added and note this, as it is used in the next the USB. -
Page 6: Installing And Running The Audio Diode Configuration Tool
Installing and Running the Audio Diode Configuration Tool Download the Audio Diode Configuration Tool onto the dedicated configuration PC. Install the setup file. The adconfig icon appears on the desktop. Run the Audio Diode Configuration Tool by double- clicking on the adconfig icon. The following configuration screen opens: Note : For Audio Diode models that do not support a microphone, Mic Settings do not appear. -
Page 7: Configuring The Audio Diode
Configuring the Audio Diode First, make sure to run and connect the Audio Diode Configuration Tool, as explained above. Using the configuration screen, set the following Audio Diode parameters, described in the following table: Parameter Description Parameter Description For the Volume Slider: For the microphone button: Moving the slider right or left will adjust the Once the user has pressed the button, how... - Page 8 Configuring the Audio Diode After changing the parameters, click ↓ Save to device. Click OK. The following Confirm dialog box opens: Click Disconnect to apply the new configuration on the Audio Diode. Restart the device. Note : It is possible to save the configuration by clicking on the File menu, selecting Save As , and saving it as an XML file.
- Page 9 Highseclabs.com ©2023. All rights reserved. HSL logo and product names are trademarks or service trademarks of HighSecLabs Ltd (HSL). All other marks are the property of their respective owners. Images for demonstration purposes only. This document may contain confidential and/or proprietary information of HSL...