Download Print this page

LEISUREWIZE Airbreak Infinity Instructions

Download this manual

Airbreak Infinity

READ THE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND INSTALLATION

BEFORE USE

When you first receive your Airbreak check the following

is included to avoid inconvenience when fitting.

Assembly instructions:

1 Ensure the ground is free of stones and other sharp

objects. Unpack and familiarise yourself with the

Airbreak, laying the Airbreak out flat on the ground

before inflation.

2 The Airbreak is comprised of three panels fastened

by zips. To inflate unscrew each securing cap of the

valve and insert the foot pump hose, and using the

foot pump begin inflation and fill until all the beams

are firm. Replace the securing cap on each valve and

tighten until you hear an audible click.

Airbreak (x3 panels)

1 - 480cm x 140cm (total)

Airbreak Peg Bag

1 Bag with 18 pegs

Foot Pump

Airbreak carry-bag

3 Once you are happy with inflation, position the

Airbreak as required and peg out using the eyelets

along the base of the Airbreak Infinity.

LWA56

Need help?

Do you have a question about the Airbreak Infinity and is the answer not in the manual?

Page 1 Airbreak, laying the Airbreak out flat on the ground Airbreak as required and peg out using the eyelets before inflation. along the base of the Airbreak Infinity. 2 The Airbreak is comprised of three panels fastened by zips. To inflate unscrew each securing cap of the...
Page 2 (Part No. LWA57). Dismantling To dismantle the Airbreak Infinity, simply reverse the erection procedure. The beams must be fully deflated and the Airbreak Infinity should be completley dry prior to being carefully rolled and placed back in the carry-bag. Beam leakages Should you experience beam failure, at any point these are easily replaceable, replacements are available from your original supplier.

Lwa56