Advertisement
Quick Links
CABINET HARDWARE
Before you begin:
Read the cabinet handles and knobs installation instructions completely
before starting.
Find a safe work space to avoid scratching your cabinets and
countertops while working with tools.
Tools you need:
Electric drill
3/16" drill bit
Pencil
#2 Phillips screwdriver
Ruler or tape measure
Masking tape (optional)
Installation template (optional)
Questions, problems, missing parts?
call Akicon Customer Service 8 a.m.-6p.m. EST, Monday-Friday
Phone: +1（302）213 4406, Email: service@akiconshop.com
AKICONSHOP.COM
Model:
01910/01920/01921
1
EX: E003003T Rev: A
Advertisement
Summary of Contents for Akicon 01910
- Page 1 Electric drill 3/16" drill bit Pencil #2 Phillips screwdriver Ruler or tape measure Masking tape (optional) Installation template (optional) Questions, problems, missing parts? call Akicon Customer Service 8 a.m.-6p.m. EST, Monday-Friday Phone: +1（302）213 4406, Email: service@akiconshop.com AKICONSHOP.COM EX: E003003T Rev: A...
- Page 2 SPECIFICATION: 1. Determine where you're going to install your cabinet handles or knobs. Common locations for kitchen cabinet hardware include the bottom left for upper Model: 01910 cabinets, or the upper left for lower cabinets. (D.xH.: 1-3/16”x29/32”) 2. Measure between the holes on the back of the cabinet door handles to find the Model: 01920 correct center to center spacing for the holes.
Need help?
Do you have a question about the 01910 and is the answer not in the manual?
Questions and answers