Kaise S365 - Portable Power Supply Manual

Kaise S365 - Portable Power Supply Manual

Advertisement

Kaise S365 - Portable Power Supply Manual

ABOUT THE UNIT

Thank you far applying our multi-function porta ble solar generator. In case of power failure or you need to charge on a travel, you can ternporarily charge your electrical or digital devices with this unit. This unit can provide USB, DC and AC output You can keep laptops, appliances, lights and more going far hours longer. Befare using this unit, please read the user manual carefully and properly keep it far reference.

ATTENTION!

This manual is to help you use the product correctly; it does not represent any description on the hardware and software configuration of the product About the product configuration, please refer to the contract related to this product (if there is), or consult to the seller that sel Is the product Pictures in this manual is far reference only, if there are individual pictures do not match the actual, please prevail in actual products.

The unit provides Modified Sine Wave output

The unit provides Modified Sine Wave output, and can be compatible to AC electric appliance that works with Sinusoidal wavefarm(power <100W). However, anything that uses an AC motor isn't going to work to full capacity on a modified sine wave. such as an electrical fan, lt will even make the electric appliance arouse sorne noise. Appliances like refrigerators, microwaves, and compressors that use AC motors and sorne delicate medical equipment will be better off with a pure sine wave inverter. This product is only used far emergency, it cannot replace the normal alternating current, far long-term use, please adapts the power station specification required by electrical appliances.

PRODUCT PARAMETERS

Capacity 155Wh, 14Ah/11.1V (equivalent 42000mAh, 3.7 V))
Dimensions(LWH) 207x96x180mm
Weight about 1.7Kg
Built-in Battery High Quality Lithium ion Batteries
Input Recharging Adapter: DC15V/2A
Solar Panel Charging: oc 13v-2sv/2A Max
Fully Charged Time DC15V/2A: g-g hours
USB Output 2 x USB SV-2.lA Total: 3.SA Max
1 x USB s~9V/2A Qualcomm QuickCharge3.0
1 x USB C s~9V/2A Qualcomm QuickCharge3.0
DC Output 3 x 5.SMM DC Output: 9-12.6V/10A(15A Max Total)
AC Output Modified SineWave Output;
AC Voltage: 100/110/120/220/230/240VAC±10%
Output Frequency: 50/60Hz±10%
warning Attention: Actual AC voltage/Frequency/Outlet(s) are customized according to different Countries and areas.
AC Power AC Continuous Output: 100W/150W Max
Bulb Type 1 x Ultra bright LEO Flashlight
1 x LED Light Panel
Power lndicator Led Display
Operation temperature -10 0C- 40 0C
Lifecycle >500 times
Package include 1 x Portable Power Supply
1 x 15V/2A Power Adapter
1 x Car Charger
1 x Cigarette Lighter Adapter
1 x user manual.

There may be sorne differences on different spare parts. Please adhere to the actual product instead.

PRODUCT DESCRIPTION

Front

PRODUCT DESCRIPTION - Front

Rear

PRODUCT DESCRIPTION - Rear

LEFT

PRODUCT DESCRIPTION - LEFT

PRODUCT DESCRIPTION - RIGHT

warning ATTENTION warning:
AC Outlets, AC output voltage and frequency will be different according to different countries ar areas. Please refer to the actual product befare using.

LED DISPlAY

LED DISPlAY

PRODUCT INSTRUCTION

  1. How to provide power far DC12V appliances(such as head lamp, fan) with this product?

The 5.5mm 12V DC output is plug and play. Plug your appliances to the DC output port to gain power. DC output rated Current: lOA, Max output Current<lSA.
warning Notices: Please confirm whether your DC12V appliance support charging with 5.5mm DC header interface (The di am eter of the DC Port of the Product is: 5.Smm),otherwise it is unab le to connect with the DC output, you can consult the electrical manufacturer, buy the corresponding adapter and connect with it.

RIGHT
PRODUCT INSTRUCTION

  1. 5.5 mm DC12V for Fan or LED lights
  2. Support 5.5 mm DC12V car kits with DC-Cigarette Lighter Adapter, such as Vacuum Cleaner, Inflation Pump, Electric wrench, fridge, etc.
    or charge car kits via DC to Cigarette Litghter Connector

warning Note: The12V DC output voltage is range between 9V~12.6V, maximum output current is the battery. lf your appliance is not built-in input voltage stabilizing function, it may shutdown when input voltage is too low, please unplug your device from the unit in time. And please charge the unit in time.

Protection Mode
Short-circuit/Overpower Protection
: lf the DC output is short-circuited or overpowered(Load(s) power>150W), the unit will shutdown to protect itself. Please clear the problem and recharge the unit to recover from protection mode.

  1. How to provide power far AC appliances with this product?

Connect the power cable plug of the electrical appliance to the AC outlet of the product, switch on the power button and the unit will start providing power to your appliances.


The Ac outlets, AC voltage and frequency are different according to different countries; please carefully check whether the product specifications are consisten\ with the appliance specifications before use, otherwise it can lead to dangerous situations.

RIGHT
Protection Mode
Limited Appliance Wattage <100W, Lamp, Electric Fan, lV, etc. AC will shutdown when it's short circuited or power overloaded. Remove the device and the unit will recover from short-circuit ar overpower protection in a few seconds. Repress the AC output button to switch on AC output again.

When the AC port is not in use, turn it off to conserve power.

warning ATTENTION warning:
AC Outlets, AC output voltage and frequency will be different according to different countries or ar eas. Please refer to the actual product befare using.

Protection Mode:
Short-circuit/Overpower Protection: lf the AC output is short-circuited or overpowered(Load(s) power>100W), the unit will shutdown AC output to protect itself. Please clear the problem and re-press the AC button far AC output.

Sorne devices, such as refrigerator, ice maker or a laser printer may require a surge power to start ar work during a very time period, the surge power could exceed 150W ar even higher, this could cause overpower protection with this unit. Please remove the devices and consult with the device manufacturers far more infarmation. Please clear the problem and re-press the AC button far AC output.

  1. How to provide power far USB(C) digital appliances with this product?

Connect the standard USB cable of digital appliance to the USB output of the unit, press the " " button to turn on USB output.

warning Notice: Sorne smart devices, such as Bluetooth headphones and LED lights.. require very small input current to charge, which could be less than 150mA. The unit may fail to charge these kind of smart devices dueto detection current limitation by the USB output ports. On this occasion, user can press the AC button "" to keep the USB port output running. Please tum off AC output when the smart devices are fully charged to save power.

Quick Charge Output:
This product supports Qualcomm QuickCharge 3.0 output, support 5V9- V / 2A max output far smartdevices which also support Qualcomm QuickCharge 3.0. The actual output voltage and current depends on the actual smartdevices, it can be obtained by consulting the smartdevice manufacturer.

RIGHT
Quick Charge Output

  1. How to use the flashlight

This unit is built with ultra bright LED flash light. Press the "" button to switch on flashl ight and single press the button to switch to blink/SOS mode, Press the button to switch off.


Do not point directly at the eyes of human in case of any damage due to the strong light.

  1. How to use the Led light panel

This unit is built with LED lightpanel. Press the"" button to switch on lightpanel and single press the button to switch brightness, Press the button again to switch off.


Do not point directly at the eyes of human in case of any damage due to the strong light.

  1. How to charge the unit?
    1. Charge through AC Wall Charger
      Using the included AC Wall Charger, plug the unit into any wall outlet to charge the unit You will know the unit is charging when the blue LED battery indicators are blinking. The unit is fully charged when all battery indicators stop blinking and remai n salid. After the unit is fully charged, please remove the AC wall charger in time.

      LEFT
      How to charge the unit
    2. Charge from Solar panel
      1. Place your solar panel where it will get as much direct sunlight as possible.
      2. Plug the output of the solar panel into the input of the unit to start charging. You will know the unit is charging when the blue LED Battery lndicator lights up and blinks. The unit is fully charged when all battery indicators stop blinking and remain salid.

        LEFT
        Charge from Solar panel - LEFT
    3. Charge from your car with a 12V car port.
      Using the included car charger, plug the unit into a 12V cigarette lighter (car port) of your car. You will know the unit is charging when the blue LED Battery lndicator lights up and blinks. The unit is fully charged when all battery indicators stop blinking and remain solid.
      warning Notice: Since the output voltage from 12v car port will float, charging speed and time from a 12v car port will be depending on actual vehicles and vehicle status.

warning Attentionwarning:
To avoid car battery power loss. Charging this unit through your car cigarette lighter is only available when your car engine is started.

SECURITY AND MAINTENANCE

  1. Do not short-circuit the unit To avoid short-circuiting, keep the unit away from ali metal objects (e.g. coin s, hair-pins, keys, etc.).
  2. Do not heat the unit, ar dispose of it in fire, water or other liquids. Keep away from high temperatures. Do not expose the unit to direct sunlight.
  3. Keep away from high humidity, dusty places.
  4. Do not disassemble or reassemble this unit.
  5. In order to extend the life of product (lithium battery), it is best to charge within 3 Do not drop, place heavy objects on, ar allow strong impact to this unit
  6. This appliance is not intended far use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision ar instruction concerning use of the appliance by a person responsible far their safety.
  7. Children should be supervised to ensure that they do not play with the appliance.
  8. Do not cover the device with towels, clothing and other item.
  9. The unit may become hot when charging. This is normal. Use caution when handling.
  10. Do not charge the unit over the required time.
  11. Disconnect the unit when fully charged.
  12. Use the unit properly to avoid electronic shock.
  13. Please deal with scrap products in accordance with the regulations, do not treat the built-in battery as a household garbage, so as not to cause the explosion and pollution.
  14. The product is only used far emergency situations, it cannot rep lace the standard DC or AC power of household appliances ar digital products.

PRODUCT APPUCATION SKILLS

  1. This product is built in high quality original lithium ion battery, it has no memory effect but high-capacity, and it is durable. However, we still recommend you toapply in the range of 10 'C ~30 'C, so as to obtain the optimal charging capacity.
  2. When charging, in order to avoid interference, please stay away from TV, radio and other equipment
  3. lf the device has not been used far a long time, please disconnect the cable and store.
  4. Sorne porta ble devices may need to be set in charge mode to charge, see the corresponding equipment use manual far more infarmation.
  5. In order to extend the life of product (lithium battery), it is best to charge within 3 months, and charge at least once within 6 months.

Cold Weather Usage

Cold temperatures (below freezing) can affect the unit's battery capacity due to chemical characteristics of the battery. lf you'II be living off-grid in sub-zero conditions, we recommend you keep your unit in an insulated cooler, and connected to a power source (solar panels). The natural heat generated by the unit contained in an insulated cooler will keep battery capacity at its highest

Recyde

Always return your used electronic products, batteries, and packaging materials to dedicated collection points. This way you help prevent uncontrolled waste disposal and promote the recycling of materiaIs.

Battery information

Your device has and interna!, non-removable, rechargeable battery. Do not attempt to remove the battery, as you may damage the device.
The battery can be charged and discharged over 500 times, but it will eventually wear out.

Statement

AII rights reserved. Reproduction in whole or in part without written permission is prohibited. AII other trademarks are trademarks of their respective owners. Features and specifications are subject to change without notice.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Kaise S365 - Portable Power Supply Manual

Advertisement

Need help?

Need help?

Do you have a question about the S365 and is the answer not in the manual?

Questions and answers

Table of Contents