Advertisement
(1218 and 1565 models only)
Unscrew the screw with a 4mm hex wrench and pull out the strap.
Wrap strap around tube and press it slightly in insertion area (A).
Tighten the screw with a 4mm hex wrench until the bracket is snug and will not move. Then cut away the excess strap if necessary.
Insert the lock like shown in image 4. You will hear a click when the lock has successfully been inserted into the bracket.
To remove press down on the release button (B) on both sides and slide the lock up.
If you would like to mount the lock horizontaily, loosen the center screw shown in image 6. . Then rotate 90 degrees so that it looks like the bracket in image 7. Tighten the center screw till snug and slide your lock into the bracket. Your bracket should look like the example in image 7.
Place the bike against an anchored stationary object. Place the Kryptonite cable around the stationary object and through the bike frame. Remove key. Check the lock before leaving the bike to be sure it is properly secured. Whenever possible, capture the anchored stationary object, the frame, and rear wheel within the cable.
Cable locks are deterrent security only.
For additional, high security proper lock-up information, please visit
www.kryptonitelock.com.
For as long as the customer owns the Kryptonite lock, if keys are lost and the key number has been registered with Kryptonite, Kryptonite will send the first pair of standard replacement keys for FREE. To register keys, complete the form on Kryptonite's website: Kryptonitelock.com > Customer Service > Register keys/ combination.
Lubricate the lock several times a year to keep the lock in its best working condition. Always use a lubricant that has only a silicone, graphite or Teflon base. Face the lock cylinder upright and spray or pour the lubricant into the cylinder. Let it sit for 5 minutes. Place a rag on the workstation and turn the lock over onto the rag for a few minutes.
Note:
Do not use WD-40! WD-40 is a solvent, not a lubricant and will remove lubricant in the cylinder.
If the lock comes with a lighted key:
To contact Kryptonite,
go to www.kryptonitelock.com or
call 1-800-SAY-LOCK (USA Only) or
001 781-828-6655.
Kryptonite
437 Turnpike Street
Canton, MA 02021
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Kryptonite 1018, 1218, 1230, 1265, 1565, 1518 - Key Cable Manual
Advertisement
Need help?
Do you have a question about the 1018 and is the answer not in the manual?
Questions and answers