Hardy Ultradisc Manual
![]()
General Care
The same method of cleaning is valid for all reels in the Ultradisc reel range.
- Remove line and backing to ensure any deposits are removed from the drag cover, particularly the screw heads.
- Remove the spool.
- Flush away dirt by placing the spool and frame under a stream of water and remove all deposits to prevent corrosion. Brushing all slots, corners and indents with a soft brush.
- Dry carefully with a lint free cloth.
- Lubricate with a good quality oil at the points illustrated in the diagrams.
- Always turn the drag to the minimum setting when not in use to avoid compression of the pads and springs.
- Always ensure the reel and line are dry before storing in the case or pouch.
![Hardy - Ultradisc - Cleaning for all reels in the Ultradisc - Part 1 Cleaning for all reels in the Ultradisc - Part 1]()
![Hardy - Ultradisc - Cleaning for all reels in the Ultradisc - Part 2 Cleaning for all reels in the Ultradisc - Part 2]()
Change your reel from left to right hand wind
All Hardy Ultradisc reels are designed to work in right or left hand wind. When you receive your reel, it will be set for left hand wind.
To convert your reel to right hand wind:
- Remove spool from frame, unscrew the captive spool nut anti-clockwise. Set the spool aside.
- Unscrew clutch bearing cover, turn anti-clockwise and remove, to facilitate this have the drag set on full.
- Remove the one-way clutch bearing, do this by gently tapping the frame face down in the palm of your hand noting which way it comes out.
- Rotate the one-way clutch bearing 180 degrees and replace back into the spool axle.
- Replace the clutch bearing cover turning clockwise.
- Replace the spool.
Ultradisc Drag System
The drag mechanism can be adjusted simply by turning the regulator button clockwise to increase the drag or anti-clockwise to decrease the drag.
When the reel is not in use the drag should be set to the minimum setting.
![Hardy - Ultradisc - Ultradisc Drag System Ultradisc Drag System]()
Customer Service Centres
Hardy Customer Service
Willowburn, Alnwick,
Northumberland, NE66 2PF, England
Tel: +44 (0)1665 602771
Hardy Factory Service Center
1900 18th Street, Spirit Lake,
IA 51360, USA.
Tel: (888) 516-1247
Hardy Reel Warranty
All Hardy Ultradisc reels carry a limited 5 year warranty on the terms set out below.
- We warrant that the Product will be free from material defects in design, material and workmanship for a period of 5 years from the date on which it was originally purchased.
- This warranty is in addition to your statutory rights in relation to products which are faulty or mis-described.
- It is important that you register your Reel within 60 days of purchase on our website www.hardyfishing.com. You will receive an email confirming your registration. Customers are requested to retain a proof of purchase in order to aid with the claims process.
- This warranty does not cover damage caused by misuse, lack of maintenance, negligence or normal wear and tear.
- For full details on this warranty, the claims process and any exclusions, please visit www.hardyfishing.com or contact your nearest customer services centre.
We may be able to offer a repair service if your product falls outside the warranty period. Please contact your nearest Customer Services Centre for further details.
Hardy, a brand from Pure Fishing, Inc.
![]()
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Hardy Ultradisc Manual
Need help?
Do you have a question about the Ultradisc and is the answer not in the manual?
Questions and answers