Advertisement
Table of Contents
Since 1966
Automatic Liquid Soap Dispenser
5
4
/
"
8
(118mm)
Specification
Surface Mounted Automatic Liquid Soap Dispenser shall hold
and dispense up to 800 ml (27 ounces) of liquid and lotion
soaps, synthetic detergents and antibacterial soaps containing
PCMX and/or Triclosan with a viscosity range of between 5 and
3500 mPa-s or cP (MilliPascal-sec or Centipoise). Dispenser body
shall be molded of high-impact white plastic. Dispenser shall be
powered by either one (1) 9 V or six (6) AA-size (1.5 V) batteries
(not supplied) and shall operate automatically from IR sensor
that shall activate soap dispensing when hands are placed in
sensor zone. Sensor detection range shall be adjustable by
© 2008, Tubular Specialties Mfg., Inc. All Rights Reserved
Manufacturer reserves the right to alter design or dimensions without formal notice and without incurring obligation.
Tubular Specialties Manufacturing, Inc.
13011 South Spring Street, Los Angeles, CA 90061-1685
Phone 800/CALL TSM (800/225-5876) or 310/515-4801
www.GrabBar.com • Fax 310/217-0653
Surface Mounted
Key
Soap Level
Viewing
Window
LED Indicator
Soap
Dispensing
Nozzle
Mounting Holes (4)
10
5
/
"
16
(263mm)
3
5
/
"
8
(92mm)
4
7
/
"
16
(113mm)
owner. Dispenser shall have two (2) soap dosage settings and shall
pump either of two preset ranges of .02 + .01 fluid ounces or .04
+ .01 fluid ounces (.5 ml to .7 ml or 1 ml to 1.4 ml) of soap during
each activation. A tamper-resistant soap level viewing winder shall
be provided. Unit shall have a swing open body secured with side-
mounted lock that is opened with special key provided.
Surface Mounted Automatic Liquid Soap Dispenser shall be model
SD-71 as manufactured by Tubular Specialties Manufacturing,
13011 South Spring Street, Los Angeles, California 90061,
tel 800-Grab Bar.
G
✔
SD-71
Technical Data
Revised October 2008
Lock
S
C
3
1
/
"
64
(27mm)
3
2
/
"
32
(53mm)
TSM SD-71 Automatic Liquid Soap
uarantee
defects in workmanship and material
for one year from shipping date.
Page 1 of 2
S
5
5
/
"
16
(135mm)
S
4
5
/
"
8
(117mm)
S
Dispenser is guaranteed against
Advertisement
Table of Contents
Summary of Contents for TSM SD-71
- Page 1 (not supplied) and shall operate automatically from IR sensor Surface Mounted Automatic Liquid Soap Dispenser shall be model SD-71 as manufactured by Tubular Specialties Manufacturing, that shall activate soap dispensing when hands are placed in 13011 South Spring Street, Los Angeles, California 90061, sensor zone.
- Page 2 It is the installer’s responsibility to select fasteners that are Install unit on wall surface at locations marked by an “S”. appropriate for the wall condition and application; TSM does The recommended installation height for general utility is not include fasteners.
Need help?
Do you have a question about the SD-71 and is the answer not in the manual?
Questions and answers