Table of Contents
Advertisement
RECOMMENDATIONS
Listed below are the most important recommendations for the use of the
16x8 Selector:
1- To avoid any equipment failures its vital to connect to the 16x8 Selector
the following things: the instrument, the amplifier inputs, the amplifier outputs
and the speakers. The initial connection should be with the amplifiers turned
off or Stand by.
2- Once everything has been connected with cables with soldered
connectors you can use the 16x8 MIDI Selector with all the amplifiers
permanently switched on. Its not neccesary to use the Stand By mode each
time that you want to change the amplifier.
3- In the case where some speaker outputs are not being used, be carefull
not to select them to avoid the amplifiers functioning without being charged.
4- This Selector contains an input mute system and phantom charge for the
amplifiers which have not been selected.
5
Advertisement
Table of Contents
