Steps
1. Adhere the coin-cell battery to the slot on the palm-rest and keyboard assembly.
2. Lift the speaker cable and route the coin-cell battery cable through the routing guide on the fan.
3. Connect the coin-cell battery cable to the I/O board.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Memory module
Removing the memory modules
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following image indicates the location of the memory modules and provides a visual representation of the removal
procedure.
20
Removing and installing components
After working inside your
Before working inside your
computer.
computer.