Control Panel; Adding Water - smartmi Evaporative Humidifier 2 User Manual

Product overview

Control panel

Display
Ambient air humidity
brightness
/humidifier water volume
button
Note：The display shows the water level percentage while water is being added. While in normal use, it shows the relative humidity level.
The water level indicator flashes red when the minimum water level is detected. It is fully illuminated and flashes when the water level
exceeds 100%.
Wi-Fi status indicator
Settings indicator
Water level
indicator
On-off/settings button
Level 1：low speed
Level 2：medium speed
Level 3：high speed
Automatic：The speed is
automatically selected based on
the current humidity and target
humidity set via the app
23
Use

Adding water

Suitable water quality: domestic, mineral or purified water.
Adding water through the water inlet
1
You can add water to the water tank through the water
inlet while the humidifier is unpluged.
Note: When the water volume exceeds the maximum water level line once the humidifier powered again, the water level indicator flashes and the humidifier
generates a beeping warning sound. If this happens, immediately unplug the humidifier and pour out proper amount of water from the tank.
2 Adding water to the water tank
When the upper housing has been removed, you can
add water directly to the water tank. Stop adding
water before it reaches the maximum water level
line (at the MAX bar).
MAX：maximum water level line
24