ASTRO ONYX 408 Manual

Flex head reversible hd cut off tool

Advertisement

Quick Links

408
FLEX HEAD
REVERSIBLE HD
CUT OFF TOOL
Study, understand and follow all instructions provided with this product.
Read these instructions carefully before installing, operating, servicing or
repairing this tool. Keep these instructions in a safe accessible place.
• Astro Pneumatic Tool Co. warrants our products to the original user against defective material or workmanship for a
period of 1 year from the date of 1st use. Astro reserves the right to determine whether the product failed because of
defective material, workmanship or other causes and to charge back for missing parts. Astro Pneumatic Tool Co., at its
discretion, will repair products covered under this warranty free of charge. The original user is to return the product
(with the exceptions listed below) with the distributor's name, address, adequate proof of date of purchase or a copy of
warranty card, and a short note explaining the problem. Failures caused by accident, alteration, or misuse are not
covered by this warranty.
• Astro Pneumatic Tool Co. or its authorized service representatives must perform all warranty repairs. Any repair to the
product by unauthorized service representatives voids this warranty. The rights under this warranty are limited to the
original user and may not be transferred to subsequent owners.
• This warranty is in lieu of all other warranties, expressed or implied, including warranties of merchantability and fitness
for a particular purpose. Some states do not allow the exclusion of limitations of incidental or consequential damages
so the above limitations may not apply to you.
PLEASE DO NOT RETURN ANY PRODUCT WITHOUT CALLING 1-800-221-9705 FOR INSTRUCTIONS

1 YEAR LIMITED WARRANTY

911

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ONYX 408 and is the answer not in the manual?

Questions and answers

Summary of Contents for ASTRO ONYX 408

  • Page 1 • Astro Pneumatic Tool Co. warrants our products to the original user against defective material or workmanship for a period of 1 year from the date of 1st use. Astro reserves the right to determine whether the product failed because of defective material, workmanship or other causes and to charge back for missing parts.
  • Page 2 Flex Head Reversible HD Cut Off Tool INTENDED USE OF THE TOOL The 408 cut off tool is designed to be used with standard 3" cut-off wheels that are meant for 16,000rpm or above to cut sheet metals and other thin metal materials. Do not use this tool outside of the designed intent.
  • Page 3 Flex Head Reversible HD Cut Off Tool WARNING • The tool shall not be used in potentially explosive atmospheres. • Disconnect the air hose before changing or adjusting any inserted tools. • Before using tool, please confirm all couplings and plugs are fixed securely. An air hose that is under pressure may lash out when disconnected and could lead to serious injuries.
  • Page 4 Flex Head Reversible HD Cut Off Tool SUGGESTED AIR LINE CONNECTION The oil and water extractor should not be mounted on or near the air compressor. The temperature of air is greatly increased during compression. As the air cools down to room temperature, in the air line, on its way to the Air Power Tool, the moisture contained in it condenses.
  • Page 5 Flex Head Reversible HD Cut Off Tool OPERATING INSTRUCTIONS Always turn off the air supply, drain the hose of air pressure and detach tool from air supply before installing, removing or adjusting any accessory or attachment to this tool, or before performing any maintenance.
  • Page 6 Flex Head Reversible HD Cut Off Tool PARTS BREAKDOWN PARTS LIST Index Part No. Description Index Part No. Description Index Part No. Description 408-01 House 408-20 O-Ring 408-39 Spring Pin 408-02 Spring Pin 408-21 O-Ring 408-40 Washer 408-03 Air Inlet 408-22 Spring Pin 408-41...

Table of Contents