Do you have a question about the WTM-W1-A and is the answer not in the manual?
Questions and answers
Summary of Contents for Electron WTM-W1-A
Page 1
Electron Microscope WTM-W1-A User Instruction Manual Please read this manual in detail ! Careful reading experience isbetter! Please keep the user instruction manual properly!
1 Product Overview Please read this manual carefully before using. Do not use the microscope until you know the method. 2 Use Instructions Please read this instruction manual carefully, and use it correctly. Pay attention to protect the lens part.Close the lens lid afteusing to avoid entering dust or strange objects.
Page 3
3 Instructions for Using the Microscope Installation Microscopy Composition Microscopic Microscope Base Monomers Using Environment Please be at-10℃~45℃, Please avoid the dust from Please avoid the microscope Use under the entering Microscope lens and being wet with water, drinks, environment interior corrosive lamp liquid Please avoidmicroscope...
At low temperatures, the available capacity of the battery decreases to varying degrees. Charging Instructions Pilot Lamp When the microscope unit power is low, the power indicator light blue light flash. The red light is always on when charging, and the indicator light goes off...
Page 5
4 Microscope Opening and Use Before using the microscope, make sure your hands are secured, or use it on the desktop. Monomer Microscope Thecore componentswere observed by microscope Focus Rotation Cylinder Multiple Regulation Microscopy optical focus modulation Lens Cap Dust-proof, protectionlens Power Button Fill Light...
Page 6
The Microscope is On and Off Press the boot button on the side for 3 seconds,the small light on the USB interface or the bottom light is on,It means that themicroscope is already turned on. Press andhold the boot button on the side for 3 seconds, USB, the smalllight on the interface side is off...
Page 7
6 The APP Use Guide Use on Android / IOS Devices: Scan the QR code, click download and install. Software to download the QR code The mobile terminal is the IOS system, and you can search for " Uni Lab" at APP Store for download Uni Lab The IOS / Android APP Icon Turn On the Device...
Page 8
Introduction and Use of the APP Interface Open the APP, and follow the indicated operation steps. (Select the content in the red box) ① ② ③ ④ ⑤...
Page 9
APP, Reading Interface Because of the mobile phone model version is different, the pictures are for reference only Photo Video Zoom In Zoom Out Take a photo: Select a photo mode Recording: Select the recording mode Zoom in:Click to zoom in on the screen (use when the screen is too small) Zoom Out:Click to zoom out the screen (used when the screen is too large,the default is the smallest each time it is opened) The Computer Interface Introduction and Use...
Page 10
②The opens the software and selects the device. ③Open the software and select the device. (Mac) 7 Troubleshoot the Microscope Problem Cause Processing Method Phenomenon During the charging process, Heat up during the Normal status the current is relatively large, charging process and the lithium battery heats up, which is a normal...
Page 11
charged firmly plugged in ① Replug interface ② No power access to ② Poweron ③ Device fault Wait for the temperature The lens shows a The ambient temperature balance, a period of fog blurred image changes dramatically, disappeared before use causing the lens to fog The product cannot be System halted...
Need help?
Do you have a question about the WTM-W1-A and is the answer not in the manual?
Questions and answers