Advertisement
Quick Links
Series P20 – Two Wire, ½ HP, 115 Volt, 60Hz
Series P35-2 – Two Wire, 1 HP, 230 Volt, 60Hz
Clearstream warrants to the original consumer of the products listed below, that they will be free from defects in material
and workmanship for the Warranty Period from the date of installation as noted.
Our warranty will not apply to any product that has been subject to negligence, misapplication, improper installation or maintenance
Buyers only remedy and Clearstream's only duty is to repair or replace defective products (at Clearstream's choice). Buyer agrees to pay
all labor and shipping associated with this warranty and to request warranty service through the installing dealer as soon as a problem is
discovered. If warranty service is requested after the Warranty Period has ended, it will not be honored.
CLEARSTREAM SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR CONTINGENT DAMAGES WHATSOEVER.
THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL NOT EXTEND BEYOND THE WARRANTY PERIOD PROVIDED HERIN.
Certain states do not permit the exclusion of incidental or consequential damages or the placing of limitations on the
duration of an implied warranty, therefore, the limitations or exclusions herein may not apply. This warranty sets forth
specific legal rights and obligations, however, additional rights may exist, which may vary from state to state.
Supersedes all previous publications.
.
PRINTED IN U.S.A
OWNERS MANUAL
4" SUBMERSIBLE PUMP
Installation * Operation
LIMITED WARRANTY
Product
4" Submersible Pump
Clearstream, P.O. Box 7568, Beaumont, TX 77726
CLEARSTREAM
P.O. Box 7568, Beaumont, TX 77726
Warranty Period
2 Year
CL370 (Rev. 10/1/10)
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for ClearStream P20 Series
Summary of Contents for ClearStream P20 Series
- Page 1 Our warranty will not apply to any product that has been subject to negligence, misapplication, improper installation or maintenance Buyers only remedy and Clearstream’s only duty is to repair or replace defective products (at Clearstream’s choice). Buyer agrees to pay all labor and shipping associated with this warranty and to request warranty service through the installing dealer as soon as a problem is discovered.
- Page 2 Inspect pump and motor for delivery damage. Report any damage box. All control components must be UL listed and suitable for end Immediately to shipping carrier or to Clearstream immediately. use application. Have any installation, repair, or service work done by your Clearstream dealer. Never run pump dry.
- Page 3 PUMP INSTALLATION Start pump. Slowly open valve until the desired flow rate is reached. Final 1. Make sure that pump and motor are free to rotate by turning setting must be within pump’s recommended operating range. theshaft by hand. 2. To prevent dropping pump, lower it by the drop pipe, not by OPERATION thecables.
- Page 4 Important Electrical Grounding Information B. Clamp or weld (or both if necessary) this bonding conductor Hazardous voltage. Can shock, burn, HAZARDOUS the grounding conductor to the equipment-grounding terminal, VOLTAGE or kill.To reduce the risk of electrical the grounding conductor on the pump housing, or an equipment shock during pump operation, ground and bond the pump grounding lead.
Need help?
Do you have a question about the P20 Series and is the answer not in the manual?
Questions and answers
How do I disassemble this pump? I need to pull the propeller etc off of it