Page 21
• Make certain the generator is on a flat, level surface and well-ventilated location. Check for loose or missing parts and for any damage which may have occurred during shipment. • Check oil level and fuel. 5. Turn the starting dial switch to the RUN position. Select the Fuel Source (LPG) 1.
Page 22
Stopping the Engine 1.Disconnect all electrical loads from the generator. 1. Turn off and remove entire electrical loads. Never start or stop the generator with electrical devices plugged in or turned on. Let the generator run at no-load for two minutes to stabilize internal temperatures of the engine and generator.
Need help?
Do you have a question about the XL3500iDF and is the answer not in the manual?
Questions and answers