CPI InTouch Smarhub Panel Manual

CPI Smarthub Panels come with the ability to customize when the system goes into
night mode (turns off display) and whether chimes / panel voices are desired
during those hours.
To adjust night time mode settings on the Smarhub Panel:
1. Tap the touchscreen to wake the panel.
2. Swipe down from the top of the screen to access the settings tray.
3. Select "Photo Frame"
4. Select the settings icon in the upper right hand corner.
5. "Nighttime Mode Start Time" is the time when the panel will start to
have a black screen until it is touched.
6. "Nighttime Mode End Time" is the time when the panel will go back to
its normal home screen.
7. "Nighttime Mode Settings" allows you to adjust whether voices and chimes
play during the Nighttime Mode.
To adjust night time mode settings on the Smarhub Panel:
1. Tap the touchscreen to wake the panel.