Advertisement
Remote Use Instruction
1. Power on: Keep press power button, until the lights on (about 2 seconds).
2. Power off: Keep press power button, until the lights off (about 5 seconds).
Notice: if power on without connect anything, it will power off after 5 minutes;
if connected the phone, it will power off after 30 minutes.
3. iOS Connect
Turn on the Bluetooth of the phone first, then turn on APP, and power on the remote controller last. LED lights on, auto
into paring mode, allowing the Bluetooth pair. The APP will show automatically connected to Feelworld-02, and the connection
is successful.
What can I do if my iPhone can not connect with remote controller?
1, pls go to bluetooth connection of your phone, check if remote controller had been connected by iphone；
2,then follow below steps to reconnect: 1) disconnect iphone Bluetooth , and switch off remote controller; 2) turn on iPhone
bluetooh, open app, and then switch on remote controller.
Advertisement
