Advertisement
Available languages
Available languages
GB
LED SOLAR WATERING CAN
70418
DIRECTIONS FOR USE
A LED Solar watering can is an environment-friendly pro-
duct. A solar cell converts sunlight into electricity and re-
charges the battery. The light turns on automatically at dusk
using the electricity stored during the day.
General notes
· Read the instructions carefully before use.
· Keep these instructions for future reference and include
these instructions if you pass on the product to third par-
ties.
· The LED Solar watering can is intended as decorative out-
door illumination. Any other use as well as modifications
of the product have to be considered as improper use and
could cause injuries or product damages. The manufactu-
rer will not be held responsible for any damages resulting
from such improper use.
· Not for commercial use.
Safety notes
⚠
WARNING
Life and accident risk for toddlers and kids! To
avoid danger of suffocation, keep packing ma-
terials away from babies and children. Risk of
suffocation due to packing material. Small parts
can be swallowed! Children often underestimate
the dangers!
· This LED Solar watering can is only suitable for decoration
and not a toy!
· NEVER look directly and unprotected into the LEDs!
Attention
The integrated LED is not replaceable.
Set up
· Turn the switch to „On". The LED Solar watering can is
now ready-to-use.
· The battery should be charged at least 8-12 hours before
first use to reach its full capacity. To load the battery only
partly will shorten the lifetime of the battery drastically.
· The light will turn on automatically at dusk.
· To turn the LED Solar watering can off, turn the On/Off-
switch to „Off".
Location & installation
· The light ON time depends on your geographical location,
weather conditions and seasonal lighting availability.
· Select a location with full direct sunlight. In a shaded loca-
tion the battery will not charged completely.
· Do not place the LED Solar watering can near to night-
time light sources such as domestic lighting or street
lights. The lights may not turn on.
· Choose a location with high solar radiation.
· In winter solar cells do not receive as much sunlight as
in summer. That will affect the number of hours the LED
Solar watering can is illuminated for.
Battery
If necessary replace the battery with a rechargeable battery
of the same type (see Technical details). Other battery types
could damage the LED Solar watering can.
1. If necessary replace the rechargeable battery by opening
the battery compartment. Therefore please remove the
screws.
2. Replace the rechargeable battery with a fresh rechar-
geable battery. Be sure to align the polarity (+/-) of the
battery as indicated by the polarity inscriptions inside of
the battery compartment.
3. Close the battery compartment by tightening the screws.
NOTICE
NEVER dispose of old and used batteries with your
household waste! Every end user is engaged to
take back empty batteries. They can be delivered
free of charge to the selling point or a local coll-
ecting point!
Troubleshooting
If your LED Solar watering can does not turn on at night, it
may be caused by one the following reasons:
· The battery needs bright daylight to recharge. Cloudy
weather may cause the battery to loose power. The solar
cell will recharge the battery on the next sunny day and
return to normal operation.
· Check the position of the solar cell (see Location & ins-
tallation). If the solar cell does not receive enough direct
sunlight, it can not recharge the battery completely.
· Dirty solar cell: A dirty solar cell can not recharge the bat-
tery completely. This affects the battery lifetime. Clean the
solar cell from dirt and debris.
· If the LED Solar watering can does not turn on in peri-
odes of good weather conditions, the battery should be
replaced.
Cleaning and care
Clean the solar cell regularly with a damp cotton or micro-
fibre cloth.
3
Advertisement
