Volume+/Power Button Components Quick Start Volume- Button Micphone 2 Charging Port Micphone 1 Multi-Function Button 1. Power on: Press and hold the Power button for 2 seconds. LED Indicator 2. Pairing: Alula Clip Press and hold the Power button for 4 seconds to enter the pairing mode. On your phone, tap to search for the Bluetooth device named “MOJO1”...
Volume- Button Volume+ / Power Button How to Wear Identify the left and the right of the headphones by the Volume button and the LED indicator should be on the right side. Wear the head- phones by putting it in the back of your head and make it firmly seat on your ears.
Page 4
Power On Press and hold the Power button for 2 seconds until it says “Power On” and the indicator flashes blue for 1 second then off. Power Off Press and hold the Power button for 2 seconds until it says “Power Off” and the indicator flashes red for 1 second then off.
About Charging While talking to A, press and Continue to talk with A and decline B hold the Function button to de- cline the incoming call from B. Charge the headphones with the included magnetic charging cable. The indi- cator will flash blue after it is fully charged. Click the Function button twice Hang up on the call from A and an- to hang up on the current call...
Bluetooth Connection Pair for the first time Turn off Bluetooth When Bluetooth connection is established, press and With the headphones powered off, press and hold the hold the Power button and the Function button simul- Power button for 4 seconds to enter the pairing mode. taneously for 2 seconds for disconnection of Bluetooth.
Specifications LED Indicator Flashes blue for 1 second Power on Speaker:Bone conduction Model: MOJO1 speaker Flashes red for 1 second Power off Frequency response: 2.4GHz Bluetooth range: 10 m Flashes blue slowly Connectable Microphone sensitivity: -36dB Bluetooth version : Bluetooth 5.0 Flashes red and blue 3 times every second Ready to pair Bluetooth protocol: A2DP 1.3, HFP (Hands-...
Storage and Maintenance When the battery level is lower than 30%, the indicator Charging flashes red at an interval of 1 second. The headphones should be stored in a cool and dry place. It should be used at the When the battery level is between 30% and 80%, the ambient temperature between 5°F (-15°C) and 131°F (55°C) and charged at the am- indicator flashes green at an interval of 1 second.
• When you need to use the headphones while engaging in an activity needing con Important Safety Instructions centrated effort, for example, riding a bicycle, or walking in or near the traffic, a con struction site or railroad, please beware of your safety and follow relevant laws regard Use manufacturer-designated accessories and supplies only.
• Do not expose this product to hot temperature, smoke, or fume least it may catch fire. Optional Accessories • Do not charge this product during thunder and lightning. Earplugs • Do not throw this product into fire lest the battery may explode when overheated. When traveling by plane or train, you may use ear earplugs to block out back- ground noise and enjoy better bone conduction sound.
Page 11
Product specifications, designs, and the content of these operating instructions are subject to change without notice. For an update on MOJAWA, please visit our website: www.mojaverse.com USER GUIDE USER GUIDE .indd 19-20 .indd 19-20...
Page 12
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the MOJO 1 and is the answer not in the manual?
Questions and answers