Advertisement
Important safeguards /Technical data/Installation
correctly positioned in the gas cylinder compartment
(fig. A).
fig. A
TECHNICAL DATA
Type
Category
G30/G31
These appliances are designed to operate with butane/propane gas at a nominal pressure of 28 - 30 mbar. An air flow of 8.4
m
3
/h is required for correct gas combustion.
INSTALLATION
Hose pressure regulators and clips
MAKE SURE the rubber hose fits perfectly on the hose connec-
tor and is held firmly in place by the hose clips (see fig. B).
fig. B
Check the expiry date and condition of the rubber hose regu-
larly. If damaged or expired, replace with a new 400 mm
Rear panel in the correct
position for use
Gas cylinder
compartment
Low
power
I3+
KW 1.50
g/h 109
High
Medium power
(models without
power
KW 4.20
g/h 305
hose in compliance with current regulations.
Make sure the hose is correctly inserted in the support (see
fig. C).
fig. C
When connecting the pressure regulator to the gas cylinder,
4
Gas pressure
thermostat
only)
KW 2.85
28-30 mbar
g/h 207
en
Advertisement
