Advertisement
Press the 'Unlock' key to
Unlock:
give the user access to change
settings and Power off. Respimo M2
will automatically lock if no action
is taken within 10 sec.
Mode:
By pressing Mode key, one
of the Invasive, Non-Invasive or
Non-Heater Wire modes can be
selected. When LED of Mode key is
on, Invasive or Non-Invasive modes
are activated corresponding to
-
indicators. If Mode key is off, the
Non-Heater Wire mode is activated
and
indicator lights up.
Mute:
The mute button silences the
humidifier's audible alarm for up to
two minutes. The muted
depends on the alarm condition and
the severity of its cause.
Standby:
The humidifier will
power ON if this button is held down
briefly, but must be held down for
three second to turn the humidifier
off (After Press Unlock Key).
Operating mode and temperature
settings will be saved when the
device turns off.
Exclamation sign: If lights up,
contact after-sales service.
Temp. Display:
show the Airway temperature in Invasive
& Non-Invasive modes and Plate heating
level in Non-Heater Wire mode.
or
time
Temp. Display:
show
the
Invasive & Non-Invasive modes and
Plate temperature in Non-Heater Wire
mode.
Customer Service: Tel:+982173098000 , Fax: +982177180629
This display will
This display will
chamber
temperature
in
Adjustment buttons:
The user can adjust Airway temperature
by
and
in Invasive & Non-
Invasive modes and Plate heating level
in Non-Heater Wire mode.
Adjustment buttons:
The
user
can
adjust
temperature by
and
in Invasive
& Non-Invasive modes.
Heater Wire disconnection:
Lights if the heater wire adaptor or
breathing
circuit
has
not
connected, or is damaged. (Invasive &
Non-Invasive modes)
Temp. Probe disconnection:
Lights if the temperature probe is not
correctly plugged into the Respimo M2,
or the probe is faulty.(Invasive & Non-
)
Invasive modes
D01072-V3
Chamber
been
Advertisement
