Advertisement
,,
20
BENCH
If missing parts - Toll free U.S./Canada - 800-635-3213 or www.LeisureAccents.com
Exploded Labeled Diagram
Parts List:
• Leg (2)
• 3" Support (2)
• 36" Plank
Tools Required:
• Rubber Mallet
• Read all of the instructions in this manual before you begin assembly. Failure to do so may result in
faulty assembly and potential injury!
• Check that you have all required parts: Do not attempt to assemble if any parts are missing. Call
800-635-3213 or visit www.LeisureAccents.com for assistance.
• Use product for intended purpose only: DO NOT stand on furniture
• Double check after installation: Before using the product, after assembly and installation, review
instructions and procedures again to make sure nothing has been overlooked
Questions, problems, missing parts?
Call customer service at 800-635-3213
Email CustomerService@LeisureAccents.com
Visit our website at www.LeisureAccents.com
Retain this manual for future use
36" Plank
3" Supports
Legs
ASSEMBLY:
1. Place the 3" support into the groove on the
bottom of the leg and tap into place with a
rubber mallet.
3. Stand the legs upright and install the other 3"
support into the top groove on the legs.
2. Repeat for the second leg.
4. Place the 36" plank over the legs such that
the spearheads on the leg align with the
receivers on the plank. Tap into place with a
rubber mallet.
Advertisement
