Advertisement
Quick Links
Operating Instructions for
Digital Transmission Phasing Testers
©
Copyright 2005 Hubbell Power Systems
Catalog No.
PSC4033465
PSC4033466
The equipment covered in these instructions must be used and serviced
only by competent, trained personnel familiar with and following approved
work and safety practices. This equipment is for use by such personnel and
these instructions are not intended as a substitute for adequate training
and experience in safe procedures for this type of equipment.
These instructions neither cover all details or situations in equipment use,
nor do they provide for every possible contingency to be encountered in
relation to installation, operation or maintenance. Should additional infor-
mation and details be desired or if situations arise which are not covered
adequately for the user's purpose, the specifics should be referred to
Hubbell Power Systems, Chance
Before operating a Chance Digital Phasing Tester, thoroughly read,
understand and follow these instructions. Keep these instructions for
future reference.
Voltage
10 - 120kV
40 - 240kV
!
CAUTION
®
.
NOTICE
®
PSP4033468
Advertisement
Related Manuals for CHANCE PSC4033465
Summary of Contents for CHANCE PSC4033465
- Page 1 ® Hubbell Power Systems, Chance NOTICE Before operating a Chance Digital Phasing Tester, thoroughly read, understand and follow these instructions. Keep these instructions for future reference. © Copyright 2005 Hubbell Power Systems...
- Page 2 15kV. When used above 15kV extra caution is required to maintain working clearance for the higher voltage. Catalog No. PSC4033465 is designed for voltages up to 120kV, which read directly on the digital display. Each Epoxiglas ®...
- Page 3 Power-Up/Power-Down/Backlight/Hold/Reset • Power-up: To turn the unit on, press and release the push button labeled “Power”. Upon power-up the Hold light will light momentarily and all segments of the display will be displayed briefly and then display 00.0 or 0.01 when in the operational mode.
- Page 4 The insulated cable must not touch any grounded or energized object because accuracy of readings will be affected and cable insulation may be impaired or damaged. Catalog No. Description PSC4033465 10-120kV Digital Phasing Tester includes 2 ea. Straight hook probe PSE4033473...