Summary of Contents for SANTEK EZ Door Sign
- Page 1 USER MANUAL San Technology, Inc. 6210 Marindustry Dr., San Diego, CA 92121 USA Tel: +1-858-278-7300 Email: cs@santek.us...
- Page 2 Table of contents 1 GENERAL DESCRIPTION ………….……………… 3 1.1 FEATURES 1.2 INTENDED APPLICATIONS 2 HOW TO USE ............ 4-5 2.1 Button settings 2.2 Charging 2.3 LED Light Indications 2.4 Mounting 3 Frequently Asked Questions (FAQ) &....5-6 Trouble Shooting...
- Page 3 1. General Description The Santek EZ Door Sign, 2.9 Inch E-Paper Display product is designed to indicate room status with super low energy consumption, in a simple few clicks and easy mounting. E-paper display only consumes power when display content changes and no wiring are needed.
- Page 4 2 How to use? 2.1 Button Settings ① ON / OFF: Press and hold (2~3 seconds) ② To change to desired language by clicking twice ③ To change to desired message by clicking once Please note: It is normal that the display will flicker for 10~15 seconds while refreshing the content.
- Page 5 2.4 Mounting Use 3M Double-sided tape (included). Place the red font’s side to the area marked by dotted line, on the back of the product. Place the black font’s side to wall/door. 3 Frequently Asked Questions (FAQ) & Trouble Shooting Q1: It takes some time to completely change display contents and the screen keeps flickering in between.
- Page 6 If the product is powered on (with blue LED indicator light) but frozen, please wait until the LED light indicator is off; and retry to power on. If the display does not power on, the battery needs to be charged. Q4: How often should I charge the battery? A: Our door sign is designed to work for 6 months under normal use without charging.
Need help?
Do you have a question about the EZ Door Sign and is the answer not in the manual?
Questions and answers