Advertisement
Quick Links
IMPORTANT SAFEGUARDS continued:
• NEVER PLACE ANYTHING OVER THE FAN OR INTO THE UNIT BLADES WHEN IT'S RUNNING.
• USE IN OPEN LUMINAIRE ONLY.
• DO NOT USE WITH DIMMERS.
• DO NOT PLACE OBJECTS NEAR THE UNIT.
• ADDED WEIGHT OF THE DEVICE MAY CAUSE INSTABILITY OF A FREE STANDING
PORTABLE LUMINAIRE.
• THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS.
• DO NOT OPERATE ANY APPLIANCE AFTER IT MALFUNCTIONS, OR IS DROPPED, OR DAMAGED
IN ANY MANNER. RETURN APPLIANCE TO THE NEAREST AUTHORIZED SERVICE FACILITY FOR
EXAMINATION, REPAIR OR ELECTRICAL OR MECHANICAL ADJUSTMENT.
• UNIT SHOULD BE TURNED OFF WHEN NOT IN USE OR DURING CLEANING. FAN HAS TO COME
TO A COMPLETE STOP BEFORE HANDLING IT.
THE LEDs ARE NON REPLACEABLE.
FOR INDOOR USE ONLY
SPECIFICATIONS:
• 120V, 420mA, 29W
• 40 High Intensity LED Bulbs
• 1000 Lumens
• Suitable for E26 Light socket base
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
BELL+HOWELL® SOCKET FANLIGHT™ ITEM NO. 8563ENCB
DISTRIBUTED BY EMSON® NY, NY, 10001 ©2022 EMSON® ALL RIGHTS RESERVED. MADE IN CHINA.
1-800-423-4248
SOCKET FAN LIGHT
3 FAN SPEEDS
3 LIGHT SETTINGS
E26
SOCKET EXTENDER
MEDIUM BASE
INCLUDED
Great for all rooms around the house, including: bedrooms,
basements, attics, boiler rooms, garages & more
15.7" DIAMETER
2-IN-1 LED LIGHT & FAN
INSTRUCTIONS
1000
REMOTE
NO WIRES
CONTROL
OR BATTERIES
TECHNOLOGY
REQUIRED
& BRACKET
LUMENS
LED
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for BELL+HOWELL SOCKET FAN LIGHT
- Page 1 & BRACKET Great for all rooms around the house, including: bedrooms, basements, attics, boiler rooms, garages & more BELL+HOWELL® SOCKET FANLIGHT™ ITEM NO. 8563ENCB DISTRIBUTED BY EMSON® NY, NY, 10001 ©2022 EMSON® ALL RIGHTS RESERVED. MADE IN CHINA. 15.7" DIAMETER...
- Page 2 ASSEMBLY USING THE REMOTE Remote working distance: up to 16 feet (5m) NOTE: Each time a button is pressed on a remote, a short beep will sound. NOTE: Fan blades come packed separately from the main power Default light setting is High. Keep pressing button to cycle unit.
Need help?
Do you have a question about the SOCKET FAN LIGHT and is the answer not in the manual?
Questions and answers
does the fan spin in a clockwise direction?
@Mike yes it does. I think it should have a reverse-switch to go counter-clockwise. I use mine in the garage, so I just turned it up to the 2nd speed and its blows the air down more.
when using remote , my tv will fast forward, How can i eliminate the remote interfering with my TV?
To stop the BELL+HOWELL SOCKET FAN LIGHT remote from interfering with your TV, try the following steps:
1. Reorient or relocate the TV’s receiving antenna.
2. Increase the distance between the fan light and the TV.
3. Plug the fan light into a different electrical circuit than the TV.
4. Consult a radio or TV technician for additional help.
This answer is automatically generated
What is the overall diameter of the fans
The overall diameter of the BELL+HOWELL SOCKET FAN LIGHT is 15.4 inches from blade tip to blade tip.
This answer is automatically generated
Fan and light not working I change battery still not working
If the BELL+HOWELL SOCKET FAN LIGHT is not working after changing the battery, ensure the unit is installed in a stationary light socket, the socket is dry, and power is switched on at the wall control or switch. Also, confirm the fan is fully secured and not overtightened. Use the remote as directed to turn on the fan or light.
This answer is automatically generated
Can the bugs be cleaned out of the light area?
How can I remove the blades from the
how to replace battery in socket ****
The BELL+HOWELL SOCKET FAN LIGHT does not require or include batteries. Therefore, there is no need to replace a battery.
This answer is automatically generated