Installation Instructions; Before Using Your Appliance; Installation Of Your Appliance - Summit CSD2B115 Owner's Manual

Hide thumbs

Table of Contents

Available languages

 Remove the exterior packing.

BEFORE USING YOUR APPLIANCE

 Check if there is any damage to the unit.

 Clean the unit. A thorough cleaning with a recommended cooktop cleaner will provide a clean, shiny

coating on the cooktop surface.

INSTALLATION OF YOUR APPLIANCE

Follow these directions to prepare the countertop cutout and install your cooktop:

1. Countertop Preparation

NOTE: Please read this section prior to making cutout for cooktop. It is important to plan ahead for

installation of the cooktop, keeping the following dimensions in mind.

A — 13 inches maximum depth of overhead

cabinets

B — 34 inches is the minimum height of the

countertop above the floor

NOTE: Some building codes may vary.

C — The minimum flat countertop surface that

the cooktop will rest upon must be equal to or

greater than the overall cooktop dimensions

(refer to the following page for overall cooktop

dimensions).

D — 30 inches minimum clearance between the

top of the cooking surface and the bottom of

an unprotected wood or metal cabinet or 24

inches minimum clearance when the bottom of

wood or metal cabinet is protected by not less

than 1/4 - inch thick flame retardant millboard

covered with not less than No. 28 MSG sheet

steel, 0.015-inch-thick stainless steel, 0.024-

inch-thick aluminum or 0.020-inch-thick copper.

E — 1-inch minimum from backsplash of

countertop to edge of glass (refer to the

following page for overall cooktop

dimensions).

NOTE: Do not install closer than 1/2 inch (12 mm) from any adjacent surface.

To eliminate the risk of burns by reaching over heated surface units, avoid having cabinet storage

space located above surface units. If cabinet storage is to be provided, the risk can be reduced

by installing a range hood that projects horizontally a minimum of 5" beyond the bottom of the

cabinets.

Before making the countertop cutout, check for clearance. Check to see if the cooktop will clear the front

and side walls of the base cabinet. It is also important to provide enough ventilation.