Advertisement
Using Your Kambrook Toaster
Before First Use
Before first use, remove any
packaging material and promotional
labels before using your toaster for the
first time.
1.
Place the toaster on a dry, level
heat resistant surface.
2.
Fully unwind the power cord and
insert power cord into a 230V or
240V power outlet and switch on
at the power outlet.
3.
For KTA270 models, place 1 slice
of bread into each toasting slot.
For KTA470 models, place 2 slices
of bread into each toasting slot.
4.
Select the desired browning
setting using the variable
browning control lever. Settings
range from '1' being the lightest
to '6' being the darkest. It is
recommended for first time use,
that the control is to be set to
setting number '3'. If toasting less
than 2 slices of bread for KTA270
models and less than 4 slices of
bread for KTA470 models, the
browning setting may need to be
reduced to avoid burning
the toast.
5.
Press the carriage control lever
down, ensuring it is locked in
position.
6.
Once the browning process is
complete and desired toast
colour is achieved, the carriage
control lever will automatically
raise the toast.
NOTE: The toasting process
can be stopped at any time by
pressing the CANCEL button or
switching off at the power outlet.
8
WARNING: The toaster is
electronically controlled
and will not lock down in
the toasting position until
the toaster is plugged
into a 230V or 240V
power outlet, switched
on and the control lever
is latched down in the
locked position.
NOTE: Depending on personal
preference and bread types, a
different browning setting may
be required. For light-textured
breads such as raisin toast and
white breads this may require
a lighter setting, whilst heavier
textured breads such as rye
bread may require a darker
setting.
Cancel Button
The CANCEL button can be selected
during operation to cancel the
toasting process. The CANCEL button
illuminates when the carriage control
lever is locked down into position and
the toasting process is in operation.
Pressing the CANCEL button any
time during operation will cause the
carriage lever to raise the toast and
cancel the toasting process.
Defrost Button
The DEFROST button is used to
toast frozen bread. Place the
frozen bread into the bread slots,
select the desired browning setting
and press the carriage control lever
down and lock into position, then
press the DEFROST button. The
DEFROST button illuminates during
the toasting process.
Advertisement
