PacSafe StrapSafe 100 PE180YB - TSA Luggage Strap With Display Window Manual

TSA luggage strap with display window

To set your combination

1. The resettable combination is preset at the factory to unlock at 0-0-0. Press the release button (A) towards the dials and press down to unfasten buckle.
   
   
2. Use a pen or similar object to push in metal button (B). Hold button as you turn the dials (C) to your desired combination.
   
   
3. Make sure you set your combination carefully by aligning the numbers to the line (D). Release pressure on the metal button, your combination is now set. Write down and memorize your combination.

Indicator instructions

4. The StrapSafe 100's indicator (E) is preset on green at the factory. If a secured access device was used to open your StrapSafe 100 by the TSA (Transport Security Administration), the colour of the indicator would change from green to red. To reset your StrapSafe 100 indicator back to green, just use a pen or similar object to push in button (F) and the indicator will return to green.

Using the StrapSafe 100

1. Press the release button (A) towards the dials and press down to unfasten buckle.
2. Wrap the StrapSafe 100 around luggage and fasten the buckle. While holding the lock body firmly, pull the strap until it constricts around your luggage.

StrapSafe 100 is an adjustable, Travel Sentry® Approved locking luggage strap that can be safely opened and relocked by TSA (Transportation Security Administration) agents at all US airports.