Get-Started
DA1432
DECT indePendant ™
V2.35
private
Emergency Caller
with Fall Detection
OVERVIEW
DA1432
delivers all functions for safe living alone at home and for
maintaining the social contact to family and:
Fall Detection with automatic Help Call sequence
Smoke Alarm Detection with automatic Help Call sequence
Emergency Call Button
Telephone Book with names for Family & Friends
Reminder Function
Voice Assistant in any native language
SET-into-OPERATION
charge device
place charging disk on flat surface (table)
connect charging disc via supplied USB cable
and power plug to 110-230VAC power
place Device for approx. 30 min on charging disc
Pay attention that device is correctly placed (see marking)
Voice Assistant : „Battery is charging"
In case battery is deeply discharged, this message can be
delayed by several seconds
Remark: Note: Device will become warm; this is normal
(Fall Detection depends on model)
step 1
SET-into-OPERATION
Register to DECT Basisstation
Place Device close to DECT Base Station
Activate „Registration Mode" of Base Station
Press Call Button of DA1432 : „Registration activated"
Pay attention to further messages of Voice Assistant
Remark : The Device registrates with PIN Code „0000"
In case PIN of Base Station is different you have to registrate
the Device via PC Programm (see CONFIGURATION)
SET-into-OPERATION
check telephone
connection
Call Telephone Home Number with your Mobile Phone
Device must ring. Hook off and check Handsfree Audio
Remark: After Call ended, you will be asked to store this
Number on the device. If yes press Call Button.
This Number will be stored as first number in Family&Friends
and Emergency Call Number for manual Help Call, Fall and
Smoke Alarm
Use enclosed PC Program to compliment the datas
Positioning Aids for Charging Disk
The deliverables contain sticky plastic bats. Use these bats for
easy-positioning of the device on the charging disk. In addition
these bats avoid the unwanted movements of the device during
charging.
The use of these bats is optional and has no effect on the charging
process
We recommend two alternatives for placement, but you are free
to find other configurations
step 2
step 3