Set The Alarm; Create A Schedule For Playing Slideshows - Pandigital PAN7001W01 User Manual

5. When the date and time are correct, press the ENTER button to set the
time and return to the SETUP screen. Press EXIT to close the Setup
menu.

Set the Alarm

Use your Digital Photo Frame as an alarm clock. You can set it to alarm with
a built-in tone or playing a pre-stored MP3 music in the build-in memory. You
can also set the alarm to alert only once or daily after setup.
1. To set the alarm clock, choose CLOCK from the HOME screen to enter
CALENDAR/CLOCK screen then press SETUP to open the Setup menu
by remote control.
2. Choose Set Alarm.
3. Use the Left and Right arrows to move through the selection fields and
the Up and Down arrows to scroll through the values (time, alarm type or
alarm tone/music etc).
4. When finish, press Enter button to set the alarm. Press EXIT to close
the menu.

Create a Schedule for Playing Slideshows

You can set your digital photo frame to display slideshows at predetermined
times.
1. To set ON/OFF Schedule and press SETUP button in HOME screen by
remote control.
2. Use the Arrow buttons to select ON/OFF Schedule and press SELECT.
The Set Schedule page opens with the Hours field for the Weekdays Turn
on at highlighted.
3. Use the Up or Down arrow to set the hour you want scheduled slideshows
to start (turn on at), then use the right arrow to move to the minutes field,
set the minutes in the same manner as the hours, and then move the
highlight to the AM/PM field.
4. Use the Up or Down arrow button to choose AM or PM.
5. Set the time you want the slideshow to end (turn off at) in the same
manner.
6. Press the Enter button when Always OFF is highlighted if you don't want
to play scheduled slideshows on weekdays. The field now reads Set
Turn-On Time. Press the Enter button to schedule weekday slideshows.
7. You can set different times for scheduled slideshows on the weekends in
21