Subscribe to Our Youtube Channel
Summary of Contents for Green BM6018
- Page 1 SHENZHEN GREEN DIGITAL POWER TECH CO., LTD BM6018 Battery Tester-Charger-Discharger-Maintainer User Manual REV1.1 Revision Date：December 2022...
- Page 2 It is designed with a portable plastic shell, and with color TFT displayer and silicon touch keys. The BM6018 is a powerful assistant for electronic engineers. It can be used to perform performance testing, capacity testing, characteristic curve measurement, and activation and maintenance of long-term storage batteries for various commonly used rechargeable batteries.
-
Page 3: View Of Product
SHENZHEN GREEN DIGITAL POWER TECH CO., LTD View of product Battery cable connector LCD Displayer Battery clips Buttons： Enter: functions/confirm increase/page up Down: decrease/page down AC Input port... - Page 4 Connect battery: Please make sure the voltage of the battery un does not exceed 30V, find red and black alligator clip cable, insert it’s yellow plug to BM6018, let red clip connect to positive pole of battery, and black clip connect to negative pole.
- Page 5 SHENZHEN GREEN DIGITAL POWER TECH CO., LTD Note: Following examples are all based on 3.6V 8000mAh Li-ion battery. BM6018 can be used for many types batteries. To get the accuracy test 3.Set Battery Parameter： results and charge safety, at first you should set the connected battery parameters.
-
Page 6: Setting Preview
After that, press <Save>. Then screen will enter 3.3 step. Select [2. Run last param], if the battery data is same as last time for BM6018. Press <Up> or <Down> keys to highlight the items, press <Enter> key to Confirm selection, Then screen will enter 3.3 step. -
Page 7: Test Mode
SHENZHEN GREEN DIGITAL POWER TECH CO., LTD Run [Test] function, after 5 seconds, screen will display test results: 3.6V 8.0Ah Li-ion SOC. SOH. Good Test mode Battery voltage 5.2 mΩ RES. 3.531V Time run ：---- Charged ：---- The fast tested SOC percentage is built based on the measured battery voltage and equipment learning. - Page 8 SHENZHEN GREEN DIGITAL POWER TECH CO., LTD After battery is fully charged, the display screen will two different display contents: 3.6V 8.0Ah Li-ion 3.6V 8.0Ah Li-ion SOC. 100% SOC. 100% 98.7% 98.0% SOH. SOH. Full charged Full charged RES. 5.2mΩ...
- Page 9 SHENZHEN GREEN DIGITAL POWER TECH CO., LTD After the battery is emptied, the display screen will There are two different display contents: 3.6V 8.0Ah Li-ion 3.6V 8.0Ah Li-ion SOC. SOC. SOH. 98.7% SOH. 97.7% Discharged Discharged RES. 5.2mΩ RES. 5.2mΩ...
- Page 10 Bluetooth function (Optional when order): BM6018-BL has Bluetooth communication function, through which users can use mobile phones, PAD or PC checks the historical charging and discharging data and curves of the battery pack, also remotely sets and controls BM** working status.
-
Page 11: Specification
SHENZHEN GREEN DIGITAL POWER TECH CO., LTD Specification Items model BM6018 AC input power 100~240V 50HZ Suitable battery type Pb-Acid(AGM, VRLA, SLA, Gel), Li-Ion, LiFePO4, NiMH, NiCd Charging method PreCharge -- C.C main charge -- special charge CV or CC -- end charge... - Page 12 SHENZHEN GREEN DIGITAL POWER TECH CO., LTD Safety notes Be sure to understand the information of the battery to be charged or discharged accurately. If the parameters is set up incorrectly the battery may severely be damaged. Especially Lithium battery can cause a fire or an explosion by over- charging.
Need help?
Do you have a question about the BM6018 and is the answer not in the manual?
Questions and answers