Advertisement
Advertisement
Table of Contents
Summary of Contents for MB Medusa GEN2 QuadHead CounterPressure Bottle Filler
- Page 1 GEN2 QuadHead CounterPressure Bottle Filler Setup, Operation, & Maintenance Guide...
- Page 2 Congratulations on your purchase! This bottle filler is designed to be an intuitive, quick, and foam-free filling station that will serve your brewery for years. We at MoreBeer! Pro are confident you will be happy with this purchase, and will be there to help if you have any questions.
- Page 3 5. Tighten the Side Valve (4.5) assemblies to the side stems. 6. Connect the BackPressure Tubing (2.8) from your CP Stem Side Valves to the Backpressure Manifold (2.5). Page 2 | 7 ©MB Medusa GEN2 QuadHead Filler Owner’s Manual V1 For replacement parts visit MoreBeerPro.com...
- Page 4 7. Connect tubing from the side of your Backpressure Manifold to the Drip Tray PRV (1.2) barb. 8. Confirm all Hose Clamps are tight, and you are ready to proceed with PreFill Sanitizing! (Please Note: Extra Hose Clamps have been included) PreFill Sanitizing: Operation of the filler is fairly intuitive, though we recommend running water/sanitizing solution instead of beer until you get the...
- Page 5 3. Hook up Beer to the 1.5” TC inlet on the Fill Block. 4. Hook up CO2 to the Gas Inlet (2.13). Page 4 | 7 ©MB Medusa GEN2 QuadHead Filler Owner’s Manual V1 For replacement parts visit MoreBeerPro.com...
- Page 6 5. Once beer, CO2, and drainage are all hooked up, you are ready to fill! 6. Purge the Fill Block by opening the Sample Valve / Purge Valve on top of the elbow until beer flows out. 7. Pull the fill head towards you, being careful not to touch the stopper (4.8) or Stem (4.7) below.
- Page 7 Always ensure that you deal with quality suppliers & trust your product sources. Do not use bottles you do not trust the quality of. We recommend using this machine sober, alert, & armed w/ safety gear. Page 6 | 7 ©MB Medusa GEN2 QuadHead Filler Owner’s Manual V1 For replacement parts visit MoreBeerPro.com...
- Page 8 For questions, Comments, Concerns, Issues, Props, Good Times, General Shenanigans, or just a High Five, contact us @ CustomerService@MoreBeerPro.com Designed, Assembled, & Loved in USA 701 Willow Pass Rd, Suite 1. Pittsburg, CA 94565 (Earth) Page 7 |7...
Need help?
Do you have a question about the Medusa GEN2 QuadHead CounterPressure Bottle Filler and is the answer not in the manual?
Questions and answers